File manager

File manager - Edit - /home/ferretapmx/public_html/rules.d.zip

Back
PK��J�\��!��75-persistent-net-generator.rulesnu��[��# PK��J�\��1�v��v��69-vdo-start-by-dev.rulesnu��[��ENV{ID_FS_TYPE}=="vdo", PROGRAM="/usr/bin/systemd-escape -p $env{DEVNAME}", ENV{SYSTEMD_WANTS}+="vdo-start-by-dev@%c" PK��bx�\�$��50-rbd.rulesnu��[��KERNEL=="rbd[0-9]", ENV{DEVTYPE}=="disk", PROGRAM="/usr/bin/ceph-rbdnamer %k", SYMLINK+="rbd/%c{1}/%c{2}" KERNEL=="rbd[0-9]", ENV{DEVTYPE}=="partition", PROGRAM="/usr/bin/ceph-rbdnamer %k", SYMLINK+="rbd/%c{1}/%c{2}-part%n" PK��bx�\�F�rY��Y��70-touchpad.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="touchpad_end" KERNEL!="event", GOTO="touchpad_end" ENV{ID_INPUT_TOUCHPAD}=="", GOTO="touchpad_end" # touchpad:pnpid:<pnpid>: KERNELS=="serio1", \ IMPORT{builtin}="hwdb 'touchpad:pnpid:$attr{firmware_id}:'", \ GOTO="touchpad_end" LABEL="touchpad_end" PK��bx�\�`~=��90-vconsole.rulesnu��[��# This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # Each vtcon keeps its own state of fonts. # ACTION=="add", SUBSYSTEM=="vtconsole", KERNEL=="vtcon", RUN+="/usr/lib/systemd/systemd-vconsole-setup" PK��bx�\�-Ţ��40-usb_modeswitch.rulesnu��[��# Part of usb-modeswitch-data, version 20170805 # # Works with usb_modeswitch versions >= 2.4.0. Slash before %k parameter # is for compatibility only. Versions >= 2.5.0 don't need it. # ACTION!="add\|change", GOTO="modeswitch_rules_end" # Adds a symlink "gsmmodem[n]" to the lowest ttyUSB port with interrupt # transfer; checked against a list of known modems, or else no action KERNEL=="ttyUSB", ATTRS{bNumConfigurations}=="", PROGRAM="usb_modeswitch --symlink-name %p %s{idVendor} %s{idProduct} %E{PRODUCT}", SYMLINK+="%c" SUBSYSTEM!="usb", ACTION!="add",, GOTO="modeswitch_rules_end" # Generic entry for most Huawei devices, excluding Android phones ATTRS{idVendor}=="12d1", ATTRS{manufacturer}!="Android", ATTR{bInterfaceNumber}=="00", ATTR{bInterfaceClass}=="08", RUN+="usb_modeswitch '%b/%k'" # HP LaserJet Professional P1102 ATTR{idVendor}=="03f0", ATTR{idProduct}=="002a", RUN+="usb_modeswitch '/%k'" # HP LaserJet Professional P1102w ATTR{idVendor}=="03f0", ATTR{idProduct}=="032a", RUN+="usb_modeswitch '/%k'" # HP hs3110 ATTR{idVendor}=="03f0", ATTR{idProduct}=="521d", RUN+="usb_modeswitch '/%k'" # HP hs3120 ATTR{idVendor}=="03f0", ATTR{idProduct}=="531d", RUN+="usb_modeswitch '/%k'" # HP hs3114 ATTR{idVendor}=="03f0", ATTR{idProduct}=="541d", RUN+="usb_modeswitch '/%k'" # HP hs4112 ATTR{idVendor}=="03f0", ATTR{idProduct}=="581d", RUN+="usb_modeswitch '/%k'" # HP lt4225 ATTR{idVendor}=="03f0", ATTR{idProduct}=="631d", RUN+="usb_modeswitch '/%k'" # HP lt4226 ATTR{idVendor}=="03f0", ATTR{idProduct}=="641d", RUN+="usb_modeswitch '/%k'" # HP lt4227 ATTR{idVendor}=="03f0", ATTR{idProduct}=="681d", RUN+="usb_modeswitch '/%k'" # HP lt4211 ATTR{idVendor}=="03f0", ATTR{idProduct}=="911d", RUN+="usb_modeswitch '/%k'" # HP lt4110 ATTR{idVendor}=="03f0", ATTR{idProduct}=="931d", RUN+="usb_modeswitch '/%k'" # HP lt4114 ATTR{idVendor}=="03f0", ATTR{idProduct}=="9a1d", RUN+="usb_modeswitch '/%k'" # HP lt4120 ATTR{idVendor}=="03f0", ATTR{idProduct}=="9d1d", RUN+="usb_modeswitch '/%k'" # Quanta MU-Q101 ATTR{idVendor}=="0408", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Quanta 1KR / USB-lte 7410 ATTR{idVendor}=="0408", ATTR{idProduct}=="ea17", RUN+="usb_modeswitch '/%k'" # Quanta 1K3 LTE ATTR{idVendor}=="0408", ATTR{idProduct}=="ea25", RUN+="usb_modeswitch '/%k'" # Quanta MobileGenie 4G LTE, Quanta 1K6 ATTR{idVendor}=="0408", ATTR{idProduct}=="ea43", RUN+="usb_modeswitch '/%k'" # MU-Q110, Yota Router (Quanta 1QDLZZZ0ST2) ATTR{idVendor}=="0408", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # SpeedUp SU-8500U ATTR{idVendor}=="0408", ATTR{idProduct}=="f001", RUN+="usb_modeswitch '/%k'" # Nokia CS-10 ATTR{idVendor}=="0421", ATTR{idProduct}=="060c", RUN+="usb_modeswitch '/%k'" # Nokia CS-15 ATTR{idVendor}=="0421", ATTR{idProduct}=="0610", RUN+="usb_modeswitch '/%k'" # Nokia CS-12 ATTR{idVendor}=="0421", ATTR{idProduct}=="0618", RUN+="usb_modeswitch '/%k'" # Nokia CS-11 ATTR{idVendor}=="0421", ATTR{idProduct}=="061d", RUN+="usb_modeswitch '/%k'" # Nokia CS-17 ATTR{idVendor}=="0421", ATTR{idProduct}=="0622", RUN+="usb_modeswitch '/%k'" # Nokia CS-18 ATTR{idVendor}=="0421", ATTR{idProduct}=="0627", RUN+="usb_modeswitch '/%k'" # Nokia CS-19 ATTR{idVendor}=="0421", ATTR{idProduct}=="062c", RUN+="usb_modeswitch '/%k'" # Nokia CS-7M-01 ATTR{idVendor}=="0421", ATTR{idProduct}=="0632", RUN+="usb_modeswitch '/%k'" # Nokia CS-21M-02 ATTR{idVendor}=="0421", ATTR{idProduct}=="0637", RUN+="usb_modeswitch '/%k'" # Logitech G920 Racing Wheel ATTR{idVendor}=="046d", ATTR{idProduct}=="c261", RUN+="usb_modeswitch '/%k'" # Philips (?), Vodafone MD950 (Wisue Technology) ATTR{idVendor}=="0471", ATTR{idProduct}=="1210", RUN+="usb_modeswitch '/%k'" # Philips TalkTalk (NXP Semiconductors "Dragonfly") ATTR{idVendor}=="0471", ATTR{idProduct}=="1237", RUN+="usb_modeswitch '/%k'" # Kyocera W06K CDMA modem ATTR{idVendor}=="0482", ATTR{idProduct}=="024d", RUN+="usb_modeswitch '/%k'" # I-O Data WMX2-U Wimax ATTR{idVendor}=="04bb", ATTR{idProduct}=="bccd", RUN+="usb_modeswitch '/%k'" # Alcatel-Lucent ABS-T920 ATTR{idVendor}=="04cc", ATTR{idProduct}=="2251", RUN+="usb_modeswitch '/%k'" # Alcatel-Lucent T930S ATTR{idVendor}=="04cc", ATTR{idProduct}=="225c", RUN+="usb_modeswitch '/%k'" # Nexperia TM TD-SCDMA ATTR{idVendor}=="04cc", ATTR{idProduct}=="226e", RUN+="usb_modeswitch '/%k'" # Nexperia TM TD-SCDMA (Variant) ATTR{idVendor}=="04cc", ATTR{idProduct}=="226f", RUN+="usb_modeswitch '/%k'" # Samsung GT-B1110 ATTR{idVendor}=="04e8", ATTR{idProduct}=="680c", RUN+="usb_modeswitch '/%k'" # Samsung GT-B3730 ATTR{idVendor}=="04e8", ATTR{idProduct}=="689a", RUN+="usb_modeswitch '/%k'" # Samsung U209 ATTR{idVendor}=="04e8", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Sunplus Techn. SU-3200U ATTR{idVendor}=="04fc", ATTR{idProduct}=="2140", RUN+="usb_modeswitch '/%k'" # AVM Fritz!Wlan USB Stick N v2 ATTR{idVendor}=="057c", ATTR{idProduct}=="62ff", RUN+="usb_modeswitch '/%k'" # AVM Fritz!Wlan USB Stick N ATTR{idVendor}=="057c", ATTR{idProduct}=="84ff", RUN+="usb_modeswitch '/%k'" # ZyXel WAH1004/WAH3004 ATTR{idVendor}=="0586", ATTR{idProduct}=="2030", RUN+="usb_modeswitch '/%k'" # Axesstel Modems (w/ initial idProduct 0x0010) ATTR{idVendor}=="05c6", ATTR{idProduct}=="0010", RUN+="usb_modeswitch '/%k'" # Samsung SGH-Z810, Option GlobeTrotter GX0201, Celot K-300 a.o., Celot CT-680, Older Option devices, AnyDATA devices, Bless UC165, StrongRising device, Prolink P2000 CDMA, TechFaith Venus VT-18, Vertex Wireless 100 Series ATTR{idVendor}=="05c6", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Various USB modems ATTR{idVendor}=="05c6", ATTR{idProduct}=="2000", RUN+="usb_modeswitch '/%k'" # D-Link DWM-162-U5, DWM-162 C1, Micromax MMX 300c ATTR{idVendor}=="05c6", ATTR{idProduct}=="2001", RUN+="usb_modeswitch '/%k'" # AnyDATA APE-540H ATTR{idVendor}=="05c6", ATTR{idProduct}=="6503", RUN+="usb_modeswitch '/%k'" # Alcatel-sbell ASB TL131 TD-LTE ATTR{idVendor}=="05c6", ATTR{idProduct}=="9024", RUN+="usb_modeswitch '/%k'" # U901 (LTE modem) ATTR{idVendor}=="05c6", ATTR{idProduct}=="98ff", RUN+="usb_modeswitch '/%k'" # Siptune LM-75 ("LinuxModem"), EWangshikong 4G ATTR{idVendor}=="05c6", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Qtronix EVDO 3G Modem (for TianYi) ATTR{idVendor}=="05c7", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # ZE-3G 7.2Mbs HSPA modem ATTR{idVendor}=="0685", ATTR{idProduct}=="2000", RUN+="usb_modeswitch '/%k'" # InfoCert Business Key (SmartCard/Reader emulation) ATTR{idVendor}=="072f", ATTR{idProduct}=="100d", RUN+="usb_modeswitch '/%k'" # D-Link DWM-156 HSUPA 3.75G a.o. ATTR{idVendor}=="07d1", ATTR{idProduct}=="a800", RUN+="usb_modeswitch '/%k'" # D-Link DWM-156 HSUPA 3.75G USB Modem ATTR{idVendor}=="07d1", ATTR{idProduct}=="a804", RUN+="usb_modeswitch '/%k'" # D-Link DWM-151 A1 ATTR{idVendor}=="07d1", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Dymo LabelManager ATTR{idVendor}=="0922", ATTR{idProduct}=="1001", RUN+="usb_modeswitch '/%k'" # Dymo LabelManager 420P ATTR{idVendor}=="0922", ATTR{idProduct}=="1003", RUN+="usb_modeswitch '/%k'" # Dymo LabelManager Wireless PnP ATTR{idVendor}=="0922", ATTR{idProduct}=="1007", RUN+="usb_modeswitch '/%k'" # Toshiba G450 ATTR{idVendor}=="0930", ATTR{idProduct}=="0d46", RUN+="usb_modeswitch '/%k'" # Zydas ZD1211RW WLAN USB, Sphairon HomeLink 1202 (Variant 1) ATTR{idVendor}=="0ace", ATTR{idProduct}=="2011", RUN+="usb_modeswitch '/%k'" # Zydas ZD1211RW WLAN USB, Sphairon HomeLink 1202 (Variant 2) ATTR{idVendor}=="0ace", ATTR{idProduct}=="20ff", RUN+="usb_modeswitch '/%k'" # Option iCon 711 ATTR{idVendor}=="0af0", ATTR{idProduct}=="4007", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6711", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6731", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6751", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6771", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6791", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6811", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6911", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6951", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="6971", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7011", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7031", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7051", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7071", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7111", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7211", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7251", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7271", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7301", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7311", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7361", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7381", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7401", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7501", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7601", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7701", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7706", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7801", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7901", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="7a01", RUN+="usb_modeswitch '/%k'" # Option iCon 461 ATTR{idVendor}=="0af0", ATTR{idProduct}=="7a05", RUN+="usb_modeswitch '/%k'" # Option Globetrotter (Variant) ATTR{idVendor}=="0af0", ATTR{idProduct}=="8006", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8200", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8201", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8300", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8302", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8304", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8400", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8600", RUN+="usb_modeswitch '/%k'" # Option GI0643 (aka XYFI) ATTR{idVendor}=="0af0", ATTR{idProduct}=="8700", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8800", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="8900", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="9000", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="9200", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="c031", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="c100", RUN+="usb_modeswitch '/%k'" # Option GlobeTrotter GI1515 ATTR{idVendor}=="0af0", ATTR{idProduct}=="d001", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d013", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d031", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d033", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d035", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d055", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d057", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d058", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d155", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d157", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d255", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d257", RUN+="usb_modeswitch '/%k'" # Option HSO device ATTR{idVendor}=="0af0", ATTR{idProduct}=="d357", RUN+="usb_modeswitch '/%k'" # Olivetti Olicard 100 and others ATTR{idVendor}=="0b3c", ATTR{idProduct}=="c700", RUN+="usb_modeswitch '/%k'" # Olivetti Olicard 145, 155 ATTR{idVendor}=="0b3c", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Olivetti Olicard 160 ATTR{idVendor}=="0b3c", ATTR{idProduct}=="f00c", RUN+="usb_modeswitch '/%k'" # Olivetti Olicard 500 ATTR{idVendor}=="0b3c", ATTR{idProduct}=="f017", RUN+="usb_modeswitch '/%k'" # Ericsson F5521gw ATTR{idVendor}=="0bdb", ATTR{idProduct}=="190d", RUN+="usb_modeswitch '/%k'" # Ericsson F5521gw (Variant) ATTR{idVendor}=="0bdb", ATTR{idProduct}=="1910", RUN+="usb_modeswitch '/%k'" # Atheros Wireless / Netgear WNDA3200 ATTR{idVendor}=="0cf3", ATTR{idProduct}=="20ff", RUN+="usb_modeswitch '/%k'" # Kobil mIdentity 3G (1) ATTR{idVendor}=="0d46", ATTR{idProduct}=="45a1", RUN+="usb_modeswitch '/%k'" # Kobil mIdentity 3G (2) ATTR{idVendor}=="0d46", ATTR{idProduct}=="45a5", RUN+="usb_modeswitch '/%k'" # Mobile Action ("Smart Cable") ATTR{idVendor}=="0df7", ATTR{idProduct}=="0800", RUN+="usb_modeswitch '/%k'" # MediaTek/Medion S4222 and probably others, MediaTek MT6276M and others ATTR{idVendor}=="0e8d", ATTR{idProduct}=="0002", RUN+="usb_modeswitch '/%k'" # MediaTek Wimax USB Card ATTR{idVendor}=="0e8d", ATTR{idProduct}=="7109", RUN+="usb_modeswitch '/%k'" # BlackBerry Q10 and Z10 ATTR{idVendor}=="0fca", ATTR{idProduct}=="8020", RUN+="usb_modeswitch '/%k'" # Sony Ericsson MD300 ATTR{idVendor}=="0fce", ATTR{idProduct}=="d0cf", RUN+="usb_modeswitch '/%k'" # Sony Ericsson EC400 ATTR{idVendor}=="0fce", ATTR{idProduct}=="d0df", RUN+="usb_modeswitch '/%k'" # Sony Ericsson MD400 ATTR{idVendor}=="0fce", ATTR{idProduct}=="d0e1", RUN+="usb_modeswitch '/%k'" # Sony Ericsson MD400G ATTR{idVendor}=="0fce", ATTR{idProduct}=="d103", RUN+="usb_modeswitch '/%k'" # GW D301 (Advinne AMC) ATTR{idVendor}=="0fd1", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # LG LDU-1900D EV-DO (Rev. A) ATTR{idVendor}=="1004", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # LG HDM-2100 (EVDO Rev.A USB modem) ATTR{idVendor}=="1004", ATTR{idProduct}=="607f", RUN+="usb_modeswitch '/%k'" # LG L-02A ATTR{idVendor}=="1004", ATTR{idProduct}=="610c", RUN+="usb_modeswitch '/%k'" # LG L-05A ATTR{idVendor}=="1004", ATTR{idProduct}=="613a", RUN+="usb_modeswitch '/%k'" # LG LUU-2100TI (aka AT&T USBConnect Turbo) ATTR{idVendor}=="1004", ATTR{idProduct}=="613f", RUN+="usb_modeswitch '/%k'" # LG L-07A ATTR{idVendor}=="1004", ATTR{idProduct}=="614e", RUN+="usb_modeswitch '/%k'" # LG LUU-2110TI ATTR{idVendor}=="1004", ATTR{idProduct}=="6156", RUN+="usb_modeswitch '/%k'" # LG AD600 ATTR{idVendor}=="1004", ATTR{idProduct}=="6190", RUN+="usb_modeswitch '/%k'" # LG VL600 ATTR{idVendor}=="1004", ATTR{idProduct}=="61aa", RUN+="usb_modeswitch '/%k'" # LG L-02C LTE ATTR{idVendor}=="1004", ATTR{idProduct}=="61dd", RUN+="usb_modeswitch '/%k'" # LG SD711 ATTR{idVendor}=="1004", ATTR{idProduct}=="61e7", RUN+="usb_modeswitch '/%k'" # LG L-08C (NTT docomo) ATTR{idVendor}=="1004", ATTR{idProduct}=="61eb", RUN+="usb_modeswitch '/%k'" # LG L-03D LTE/3G ATTR{idVendor}=="1004", ATTR{idProduct}=="6327", RUN+="usb_modeswitch '/%k'" # UTStarcom UM175 (distributor "Alltel") ATTR{idVendor}=="106c", ATTR{idProduct}=="3b03", RUN+="usb_modeswitch '/%k'" # Pantech / UTStarcom UMW190 (Verizon) ATTR{idVendor}=="106c", ATTR{idProduct}=="3b05", RUN+="usb_modeswitch '/%k'" # UTStarcom UM185E (distributor "Alltel") ATTR{idVendor}=="106c", ATTR{idProduct}=="3b06", RUN+="usb_modeswitch '/%k'" # Pantech UML290 ATTR{idVendor}=="106c", ATTR{idProduct}=="3b11", RUN+="usb_modeswitch '/%k'" # Option Beemo / Pantech P4200 LTE ATTR{idVendor}=="106c", ATTR{idProduct}=="3b14", RUN+="usb_modeswitch '/%k'" # Sagem F@ST 9520-35-GLR ATTR{idVendor}=="1076", ATTR{idProduct}=="7f40", RUN+="usb_modeswitch '/%k'" # Hisense E910 EVDO Phone ATTR{idVendor}=="109b", ATTR{idProduct}=="f009", RUN+="usb_modeswitch '/%k'" # Pantech/Verizon UML295 ATTR{idVendor}=="10a9", ATTR{idProduct}=="606f", RUN+="usb_modeswitch '/%k'" # Pantech LTE Modem ATTR{idVendor}=="10a9", ATTR{idProduct}=="6080", RUN+="usb_modeswitch '/%k'" # Sierra devices (specific driver) ATTR{idVendor}=="1199", ATTR{idProduct}=="0fff", RUN+="usb_modeswitch '/%k'" # Sierra MC8305 ATTR{idVendor}=="1199", ATTR{idProduct}=="9011", RUN+="usb_modeswitch '/%k'" # Sierra MC8355 ATTR{idVendor}=="1199", ATTR{idProduct}=="9013", RUN+="usb_modeswitch '/%k'" # Sierra MC8355 Variant ATTR{idVendor}=="1199", ATTR{idProduct}=="9017", RUN+="usb_modeswitch '/%k'" # Sierra MC7770 ATTR{idVendor}=="1199", ATTR{idProduct}=="901b", RUN+="usb_modeswitch '/%k'" # Sierra EM7700 ATTR{idVendor}=="1199", ATTR{idProduct}=="901c", RUN+="usb_modeswitch '/%k'" # Sierra EM7355 ATTR{idVendor}=="1199", ATTR{idProduct}=="901f", RUN+="usb_modeswitch '/%k'" # Sierra EM7305 ATTR{idVendor}=="1199", ATTR{idProduct}=="9041", RUN+="usb_modeswitch '/%k'" # Sierra AC340U ATTR{idVendor}=="1199", ATTR{idProduct}=="9051", RUN+="usb_modeswitch '/%k'" # Sierra AC770S ATTR{idVendor}=="1199", ATTR{idProduct}=="9053", RUN+="usb_modeswitch '/%k'" # Sierra EM7305 ATTR{idVendor}=="1199", ATTR{idProduct}=="9063", RUN+="usb_modeswitch '/%k'" # Digicom 8E4455 (and all Pirelli devices - EXPERIMENTAL) ATTR{idVendor}=="1266", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Huawei ME909u-521 (MBIM, dummy config) ATTR{idVendor}=="12d1", ATTR{idProduct}=="1573", RUN+="usb_modeswitch '/%k'" # Huawei ME906, ME909 (MBIM, dummy config) ATTR{idVendor}=="12d1", ATTR{idProduct}=="15c1", RUN+="usb_modeswitch '/%k'" # Cisco AM10 "Valet Connector" ATTR{idVendor}=="1307", ATTR{idProduct}=="1169", RUN+="usb_modeswitch '/%k'" # Novatel Wireless devices ATTR{idVendor}=="1410", ATTR{idProduct}=="5010", RUN+="usb_modeswitch '/%k'" # Novatel MC990D ATTR{idVendor}=="1410", ATTR{idProduct}=="5020", RUN+="usb_modeswitch '/%k'" # Novatel MC996D ATTR{idVendor}=="1410", ATTR{idProduct}=="5023", RUN+="usb_modeswitch '/%k'" # Novatel U760 ATTR{idVendor}=="1410", ATTR{idProduct}=="5030", RUN+="usb_modeswitch '/%k'" # Novatel MC760 3G ATTR{idVendor}=="1410", ATTR{idProduct}=="5031", RUN+="usb_modeswitch '/%k'" # Novatel Generic MiFi 2352 / Vodafone MiFi 2352 ATTR{idVendor}=="1410", ATTR{idProduct}=="5041", RUN+="usb_modeswitch '/%k'" # Novatel MiFi 4082 ATTR{idVendor}=="1410", ATTR{idProduct}=="5055", RUN+="usb_modeswitch '/%k'" # Novatel Wireless MC545 HSPA, U679 LTE ATTR{idVendor}=="1410", ATTR{idProduct}=="5059", RUN+="usb_modeswitch '/%k'" # Novatel Generic MiFi 2372 / Vodafone MiFi 2372 ATTR{idVendor}=="1410", ATTR{idProduct}=="7001", RUN+="usb_modeswitch '/%k'" # Novatel U620L ATTR{idVendor}=="1410", ATTR{idProduct}=="9020", RUN+="usb_modeswitch '/%k'" # Sequans SQN1210/SQN1220 (generic chipsets) ATTR{idVendor}=="148e", ATTR{idProduct}=="a000", RUN+="usb_modeswitch '/%k'" # Motorola 802.11 bg WLAN (TER/GUSB3-E) ATTR{idVendor}=="148f", ATTR{idProduct}=="2578", RUN+="usb_modeswitch '/%k'" # RaLink MT7601U ATTR{idVendor}=="148f", ATTR{idProduct}=="2878", RUN+="usb_modeswitch '/%k'" # China TeleCom CBP7.0 ATTR{idVendor}=="15eb", ATTR{idProduct}=="7153", RUN+="usb_modeswitch '/%k'" # Amoi H-01 ATTR{idVendor}=="1614", ATTR{idProduct}=="0800", RUN+="usb_modeswitch '/%k'" # Amoi H-02 ATTR{idVendor}=="1614", ATTR{idProduct}=="0802", RUN+="usb_modeswitch '/%k'" # Anydata ADU-890WH ATTR{idVendor}=="16d5", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # C-motech CHU-628S ATTR{idVendor}=="16d8", ATTR{idProduct}=="6281", RUN+="usb_modeswitch '/%k'" # C-motech D-50 (aka "CDU-680", "CNU-680") ATTR{idVendor}=="16d8", ATTR{idProduct}=="6803", RUN+="usb_modeswitch '/%k'" # C-motech CDU-685a ATTR{idVendor}=="16d8", ATTR{idProduct}=="6804", RUN+="usb_modeswitch '/%k'" # C-motech CHU-629S ATTR{idVendor}=="16d8", ATTR{idProduct}=="700a", RUN+="usb_modeswitch '/%k'" # C-motech CHU-629S (Variant) ATTR{idVendor}=="16d8", ATTR{idProduct}=="700b", RUN+="usb_modeswitch '/%k'" # C-motech CGU-628 (aka "Franklin Wireless CGU-628A" aka "4G Systems XS Stick W12") ATTR{idVendor}=="16d8", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Axesstel MV210 ATTR{idVendor}=="1726", ATTR{idProduct}=="1900", RUN+="usb_modeswitch '/%k'" # Axesstel MU130 ATTR{idVendor}=="1726", ATTR{idProduct}=="f00e", RUN+="usb_modeswitch '/%k'" # Spreadtrum SC7702 ATTR{idVendor}=="1782", ATTR{idProduct}=="0003", RUN+="usb_modeswitch '/%k'" # Spreadtrum SC7702 (Variant) ATTR{idVendor}=="1782", ATTR{idProduct}=="0023", RUN+="usb_modeswitch '/%k'" # JOA Telecom LM-700r ATTR{idVendor}=="198a", ATTR{idProduct}=="0003", RUN+="usb_modeswitch '/%k'" # Beceem BCSM250 ATTR{idVendor}=="198f", ATTR{idProduct}=="bccd", RUN+="usb_modeswitch '/%k'" # ZTE MU351 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0003", RUN+="usb_modeswitch '/%k'" # ZTE AC581 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0026", RUN+="usb_modeswitch '/%k'" # ZTE MF636DB ATTR{idVendor}=="19d2", ATTR{idProduct}=="0033", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K2525 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0040", RUN+="usb_modeswitch '/%k'" # ZTE MF110 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="0053", RUN+="usb_modeswitch '/%k'" # ZTE MF110 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="0083", RUN+="usb_modeswitch '/%k'" # ZTE MU330 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0090", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K4505-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="0101", RUN+="usb_modeswitch '/%k'" # ZTE MF112 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0103", RUN+="usb_modeswitch '/%k'" # ZTE MF637 (Variant for Orange France) ATTR{idVendor}=="19d2", ATTR{idProduct}=="0110", RUN+="usb_modeswitch '/%k'" # ZTE MF651 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0115", RUN+="usb_modeswitch '/%k'" # ZTE MF652 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="0146", RUN+="usb_modeswitch '/%k'" # ZTE MF190 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="0149", RUN+="usb_modeswitch '/%k'" # ZTE MF656A, MF668A, MF669 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0150", RUN+="usb_modeswitch '/%k'" # ZTE MF190 (Variant) and others ATTR{idVendor}=="19d2", ATTR{idProduct}=="0154", RUN+="usb_modeswitch '/%k'" # ZTE MF820 4G LTE ATTR{idVendor}=="19d2", ATTR{idProduct}=="0166", RUN+="usb_modeswitch '/%k'" # ZTE A371B ATTR{idVendor}=="19d2", ATTR{idProduct}=="0169", RUN+="usb_modeswitch '/%k'" # ZTE MF820s, MF832s ATTR{idVendor}=="19d2", ATTR{idProduct}=="0198", RUN+="usb_modeswitch '/%k'" # Onda MT8205 LTE ATTR{idVendor}=="19d2", ATTR{idProduct}=="0266", RUN+="usb_modeswitch '/%k'" # ZTE MF821D (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="0304", RUN+="usb_modeswitch '/%k'" # ZTE MF821D/MF826 ATTR{idVendor}=="19d2", ATTR{idProduct}=="0318", RUN+="usb_modeswitch '/%k'" # ZTE MF821D ATTR{idVendor}=="19d2", ATTR{idProduct}=="0325", RUN+="usb_modeswitch '/%k'" # ZTE MF90 Mobile Hotspot ATTR{idVendor}=="19d2", ATTR{idProduct}=="0388", RUN+="usb_modeswitch '/%k'" # Telewell TW-LTE 4G ATTR{idVendor}=="19d2", ATTR{idProduct}=="0413", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K3805-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1001", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K3570-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1007", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K3571-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1009", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K3806-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1013", RUN+="usb_modeswitch '/%k'" # Vodafone K5006Z (MF821) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1017", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE R203 Router ATTR{idVendor}=="19d2", ATTR{idProduct}=="1019", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE R203 Router ATTR{idVendor}=="19d2", ATTR{idProduct}=="1020", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE K4201-z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1022", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE R212 Router ATTR{idVendor}=="19d2", ATTR{idProduct}=="1026", RUN+="usb_modeswitch '/%k'" # Vodafone K5008-z (MF823) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1030", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE R206-z Router ATTR{idVendor}=="19d2", ATTR{idProduct}=="1034", RUN+="usb_modeswitch '/%k'" # ZTE / Vodafone K4607-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1038", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE R209-z Router ATTR{idVendor}=="19d2", ATTR{idProduct}=="1042", RUN+="usb_modeswitch '/%k'" # ZTE MF730 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1046", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K4510-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1171", RUN+="usb_modeswitch '/%k'" # Vodafone / ZTE K3770-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1175", RUN+="usb_modeswitch '/%k'" # Vodafone (ZTE) K3772-Z ATTR{idVendor}=="19d2", ATTR{idProduct}=="1179", RUN+="usb_modeswitch '/%k'" # ZTE MF691 (T-Mobile Rocket 2.0) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1201", RUN+="usb_modeswitch '/%k'" # ZTE MF192 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1207", RUN+="usb_modeswitch '/%k'" # ZTE MF195 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1210", RUN+="usb_modeswitch '/%k'" # ZTE MF192 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1216", RUN+="usb_modeswitch '/%k'" # ZTE MF192 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1219", RUN+="usb_modeswitch '/%k'" # ZTE MF190 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1224", RUN+="usb_modeswitch '/%k'" # ZTE MF668 (Variant), MF70 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1225", RUN+="usb_modeswitch '/%k'" # ZTE MF680 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1227", RUN+="usb_modeswitch '/%k'" # ZTE MFxxx ATTR{idVendor}=="19d2", ATTR{idProduct}=="1232", RUN+="usb_modeswitch '/%k'" # ZTE MFxxx ATTR{idVendor}=="19d2", ATTR{idProduct}=="1233", RUN+="usb_modeswitch '/%k'" # ZTE / Vodafone K4201 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1237", RUN+="usb_modeswitch '/%k'" # ZTE MF825A ATTR{idVendor}=="19d2", ATTR{idProduct}=="1238", RUN+="usb_modeswitch '/%k'" # ZTE MF730 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1420", RUN+="usb_modeswitch '/%k'" # ZTE MFxxx ATTR{idVendor}=="19d2", ATTR{idProduct}=="1511", RUN+="usb_modeswitch '/%k'" # ZTE MF192 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1514", RUN+="usb_modeswitch '/%k'" # ZTE MF192 (Variant) ATTR{idVendor}=="19d2", ATTR{idProduct}=="1517", RUN+="usb_modeswitch '/%k'" # ZTE MF652 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1520", RUN+="usb_modeswitch '/%k'" # ZTE MF591 TMobile ATTR{idVendor}=="19d2", ATTR{idProduct}=="1523", RUN+="usb_modeswitch '/%k'" # ZTE MF196 ATTR{idVendor}=="19d2", ATTR{idProduct}=="1528", RUN+="usb_modeswitch '/%k'" # ZTE MF190J ATTR{idVendor}=="19d2", ATTR{idProduct}=="1536", RUN+="usb_modeswitch '/%k'" # ZTE MF190J ATTR{idVendor}=="19d2", ATTR{idProduct}=="1542", RUN+="usb_modeswitch '/%k'" # ZTE MF195E ATTR{idVendor}=="19d2", ATTR{idProduct}=="1580", RUN+="usb_modeswitch '/%k'" # ZTE MF710M Variants ATTR{idVendor}=="19d2", ATTR{idProduct}=="1588", RUN+="usb_modeswitch '/%k'" # ZTE MF710 (Vietnam) a.o. ATTR{idVendor}=="19d2", ATTR{idProduct}=="1595", RUN+="usb_modeswitch '/%k'" # ZTE devices, some Onda devices ATTR{idVendor}=="19d2", ATTR{idProduct}=="2000", RUN+="usb_modeswitch '/%k'" # ZTE MF60 ATTR{idVendor}=="19d2", ATTR{idProduct}=="2004", RUN+="usb_modeswitch '/%k'" # ZTE AX226 WiMax ATTR{idVendor}=="19d2", ATTR{idProduct}=="bccd", RUN+="usb_modeswitch '/%k'" # ZTE AC682 (a.k.a. SmartFren Connex) ATTR{idVendor}=="19d2", ATTR{idProduct}=="ffde", RUN+="usb_modeswitch '/%k'" # ZTE "ffe" devices 1 (e.g. Cricket A605) ATTR{idVendor}=="19d2", ATTR{idProduct}=="ffe6", RUN+="usb_modeswitch '/%k'" # ZTE "ff" devices 1 ATTR{idVendor}=="19d2", ATTR{idProduct}=="fff5", RUN+="usb_modeswitch '/%k'" # ZTE "fff" devices 2 ATTR{idVendor}=="19d2", ATTR{idProduct}=="fff6", RUN+="usb_modeswitch '/%k'" # BandRich BandLuxe C100, C120, C170, C270, C3xx, C508 ATTR{idVendor}=="1a8d", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # BandRich BandLuxe C339 ATTR{idVendor}=="1a8d", ATTR{idProduct}=="2000", RUN+="usb_modeswitch '/%k'" # Hummer DTM5731, Aircard 901 ATTR{idVendor}=="1ab7", ATTR{idProduct}=="5700", RUN+="usb_modeswitch '/%k'" # EpiValley SEC-7089 (featured by Alegro and Starcomms / iZAP) ATTR{idVendor}=="1b7d", ATTR{idProduct}=="0700", RUN+="usb_modeswitch '/%k'" # ETCOM E300 ATTR{idVendor}=="1bbb", ATTR{idProduct}=="000f", RUN+="usb_modeswitch '/%k'" # Alcatel OT-X080C ATTR{idVendor}=="1bbb", ATTR{idProduct}=="00ca", RUN+="usb_modeswitch '/%k'" # Haier EVDO Rev. A ATTR{idVendor}=="1bbb", ATTR{idProduct}=="011f", RUN+="usb_modeswitch '/%k'" # Alcatel X602D ATTR{idVendor}=="1bbb", ATTR{idProduct}=="022c", RUN+="usb_modeswitch '/%k'" # Yota 4G LTE W8 ATTR{idVendor}=="1bbb", ATTR{idProduct}=="025e", RUN+="usb_modeswitch '/%k'" # Alcatel X200/X200L/X060S/L100V, Archos G9 3G Key ATTR{idVendor}=="1bbb", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Alcatel OT-X220D, L100V ATTR{idVendor}=="1bbb", ATTR{idProduct}=="f017", RUN+="usb_modeswitch '/%k'" # Alcatel OT X220L ATTR{idVendor}=="1bbb", ATTR{idProduct}=="f052", RUN+="usb_modeswitch '/%k'" # Alcatel One Touch X020 ATTR{idVendor}=="1c9e", ATTR{idProduct}=="1001", RUN+="usb_modeswitch '/%k'" # TU930, IVIO IV-2010u ATTR{idVendor}=="1c9e", ATTR{idProduct}=="6000", RUN+="usb_modeswitch '/%k'" # Omega WL-72B ("Vibe 3G") ATTR{idVendor}=="1c9e", ATTR{idProduct}=="6061", RUN+="usb_modeswitch '/%k'" # Emobile D12LC ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9101", RUN+="usb_modeswitch '/%k'" # MyWave SW006 Sport Phone/Modem Combination ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9200", RUN+="usb_modeswitch '/%k'" # Emobile D21LC ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9401", RUN+="usb_modeswitch '/%k'" # Longcheer SU9800 ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9800", RUN+="usb_modeswitch '/%k'" # Telewell TW-3G HSPA+, FS01BU 3G, SmartBro WM66E ATTR{idVendor}=="1c9e", ATTR{idProduct}=="98ff", RUN+="usb_modeswitch '/%k'" # XS Stick W100 (Omega) ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9bfe", RUN+="usb_modeswitch '/%k'" # Prolink PCM100 ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9d00", RUN+="usb_modeswitch '/%k'" # BSNL Capitel ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9e00", RUN+="usb_modeswitch '/%k'" # Explay Slim ATTR{idVendor}=="1c9e", ATTR{idProduct}=="9e08", RUN+="usb_modeswitch '/%k'" # Longcheer/Longsoon (aka Omega Technology) devices, MobiData MBD-200HU and others ATTR{idVendor}=="1c9e", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Micromax MMX400R / 4G Systems XSBOXGO ATTR{idVendor}=="1c9e", ATTR{idProduct}=="f010", RUN+="usb_modeswitch '/%k'" # TechFaith BSNL Capitel ATTR{idVendor}=="1d09", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Aiko 81D ATTR{idVendor}=="1d09", ATTR{idProduct}=="1021", RUN+="usb_modeswitch '/%k'" # TechFaith FlyingLARK46 ATTR{idVendor}=="1d09", ATTR{idProduct}=="1025", RUN+="usb_modeswitch '/%k'" # Qisda H21 Flying Beetle ATTR{idVendor}=="1da5", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Wisue W340 ATTR{idVendor}=="1dbc", ATTR{idProduct}=="0669", RUN+="usb_modeswitch '/%k'" # Solomon S3Gm-660 ATTR{idVendor}=="1dd6", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Philips PicoPix 1020 Projector ATTR{idVendor}=="1de1", ATTR{idProduct}=="1101", RUN+="usb_modeswitch '/%k'" # Option iCON 210, PROLiNK PHS100 + PH300, Hyundai MB-810, A-Link 3GU ATTR{idVendor}=="1e0e", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # 3GO 3GO11 HSUPA ATTR{idVendor}=="1e89", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # AirPlus MCD-800 ATTR{idVendor}=="1edf", ATTR{idProduct}=="6003", RUN+="usb_modeswitch '/%k'" # Onda MV815U ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0003", RUN+="usb_modeswitch '/%k'" # Onda POM1051 ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0007", RUN+="usb_modeswitch '/%k'" # Onda MW833UP ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0009", RUN+="usb_modeswitch '/%k'" # Onda MW833UP + MW835UP ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0013", RUN+="usb_modeswitch '/%k'" # Onda MO835UP ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0018", RUN+="usb_modeswitch '/%k'" # Onda MW836UP-K ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0040", RUN+="usb_modeswitch '/%k'" # Onda MDC655 ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0045", RUN+="usb_modeswitch '/%k'" # Onda MT655 ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0048", RUN+="usb_modeswitch '/%k'" # Onda MDC655 ATTR{idVendor}=="1ee8", ATTR{idProduct}=="004a", RUN+="usb_modeswitch '/%k'" # Onda MDC655 Variant ATTR{idVendor}=="1ee8", ATTR{idProduct}=="004f", RUN+="usb_modeswitch '/%k'" # Onda MW875UP ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0054", RUN+="usb_modeswitch '/%k'" # Onda MSA 14.4 (TIM Brasil) ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0060", RUN+="usb_modeswitch '/%k'" # Onda TM201, CM201 ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0063", RUN+="usb_modeswitch '/%k'" # Onda WM301 ATTR{idVendor}=="1ee8", ATTR{idProduct}=="0068", RUN+="usb_modeswitch '/%k'" # Cricket A600 ATTR{idVendor}=="1f28", ATTR{idProduct}=="0021", RUN+="usb_modeswitch '/%k'" # Franklin Wireless U210 (Variant) ATTR{idVendor}=="1fac", ATTR{idProduct}=="0032", RUN+="usb_modeswitch '/%k'" # Franklin Wireless U210 ATTR{idVendor}=="1fac", ATTR{idProduct}=="0130", RUN+="usb_modeswitch '/%k'" # Franklin Wireless U600 ATTR{idVendor}=="1fac", ATTR{idProduct}=="0150", RUN+="usb_modeswitch '/%k'" # Franklin Wireless U600 ATTR{idVendor}=="1fac", ATTR{idProduct}=="0151", RUN+="usb_modeswitch '/%k'" # D-Link DWM-157 B1 ATTR{idVendor}=="2001", ATTR{idProduct}=="00a6", RUN+="usb_modeswitch '/%k'" # D-Link DWM-157 C1 ATTR{idVendor}=="2001", ATTR{idProduct}=="00a7", RUN+="usb_modeswitch '/%k'" # D-Link DWP-157 C1 ATTR{idVendor}=="2001", ATTR{idProduct}=="7600", RUN+="usb_modeswitch '/%k'" # D-Link DWM-221 ATTR{idVendor}=="2001", ATTR{idProduct}=="98ff", RUN+="usb_modeswitch '/%k'" # D-Link DWM-221 B1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a401", RUN+="usb_modeswitch '/%k'" # D-Link DWM-156 A8, DWP-157 B1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a403", RUN+="usb_modeswitch '/%k'" # D-Link DWM-167 A1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a405", RUN+="usb_modeswitch '/%k'" # D-Link DWM-221 ATTR{idVendor}=="2001", ATTR{idProduct}=="a406", RUN+="usb_modeswitch '/%k'" # D-Link DWM-157 C1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a407", RUN+="usb_modeswitch '/%k'" # D-Link DWM-156 A8 (Myanmar) ATTR{idVendor}=="2001", ATTR{idProduct}=="a40a", RUN+="usb_modeswitch '/%k'" # D-Link DWR-910 ATTR{idVendor}=="2001", ATTR{idProduct}=="a40d", RUN+="usb_modeswitch '/%k'" # D-Link DWM-156 A7 ATTR{idVendor}=="2001", ATTR{idProduct}=="a706", RUN+="usb_modeswitch '/%k'" # D-Link DWM-157 B1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a707", RUN+="usb_modeswitch '/%k'" # D-Link DWM-158 D1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a708", RUN+="usb_modeswitch '/%k'" # D-Link DWR-510 ATTR{idVendor}=="2001", ATTR{idProduct}=="a805", RUN+="usb_modeswitch '/%k'" # D-Link DWM-157 A1 ATTR{idVendor}=="2001", ATTR{idProduct}=="a809", RUN+="usb_modeswitch '/%k'" # D-Link DWM-156 (Variant) ATTR{idVendor}=="2001", ATTR{idProduct}=="a80b", RUN+="usb_modeswitch '/%k'" # D-Link DWM-222 ATTR{idVendor}=="2001", ATTR{idProduct}=="ab00", RUN+="usb_modeswitch '/%k'" # Venus VT-18 ATTR{idVendor}=="2015", ATTR{idProduct}=="0001", RUN+="usb_modeswitch '/%k'" # Haier CE682 (EVDO) ATTR{idVendor}=="201e", ATTR{idProduct}=="1023", RUN+="usb_modeswitch '/%k'" # Haier CE 100 ATTR{idVendor}=="201e", ATTR{idProduct}=="2009", RUN+="usb_modeswitch '/%k'" # Mediatek MT6229, Micromax MMX 377G, Olicard 300 ATTR{idVendor}=="2020", ATTR{idProduct}=="0002", RUN+="usb_modeswitch '/%k'" # SpeedUp SU-8000 and others ATTR{idVendor}=="2020", ATTR{idProduct}=="f00e", RUN+="usb_modeswitch '/%k'" # SpeedUp SU-8000U ATTR{idVendor}=="2020", ATTR{idProduct}=="f00f", RUN+="usb_modeswitch '/%k'" # Changhong CH690, D-Link DWM-163 + DWM-168 ATTR{idVendor}=="2077", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Telenet 3G dongle (T&W WU160), Netgear AC327U and others ATTR{idVendor}=="2077", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # BM WM78 ATTR{idVendor}=="20a6", ATTR{idProduct}=="f00a", RUN+="usb_modeswitch '/%k'" # Intex 3.5G ATTR{idVendor}=="20a6", ATTR{idProduct}=="f00e", RUN+="usb_modeswitch '/%k'" # Tlaytech TEU800 ATTR{idVendor}=="20b9", ATTR{idProduct}=="1682", RUN+="usb_modeswitch '/%k'" # StrongRising (China Telcom), Air FlexiNet ATTR{idVendor}=="21f5", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # StrongRising STD808 ATTR{idVendor}=="21f5", ATTR{idProduct}=="3010", RUN+="usb_modeswitch '/%k'" # Viettel VT100 ATTR{idVendor}=="2262", ATTR{idProduct}=="0001", RUN+="usb_modeswitch '/%k'" # WeTelecom WM-D200 ATTR{idVendor}=="22de", ATTR{idProduct}=="6801", RUN+="usb_modeswitch '/%k'" # WeTelecom WM-D200A ATTR{idVendor}=="22de", ATTR{idProduct}=="6802", RUN+="usb_modeswitch '/%k'" # WeTelecom WM-D300 ATTR{idVendor}=="22de", ATTR{idProduct}=="6803", RUN+="usb_modeswitch '/%k'" # Tata Photon+, Olive VME102 ATTR{idVendor}=="22f4", ATTR{idProduct}=="0021", RUN+="usb_modeswitch '/%k'" # Linktop LW272/LW273 (BSNL Teracom) ATTR{idVendor}=="230d", ATTR{idProduct}=="0001", RUN+="usb_modeswitch '/%k'" # Linktop LW272/LW273 (BSNL Teracom) ATTR{idVendor}=="230d", ATTR{idProduct}=="0003", RUN+="usb_modeswitch '/%k'" # Visiontek 82GH 3G ATTR{idVendor}=="230d", ATTR{idProduct}=="0007", RUN+="usb_modeswitch '/%k'" # Zoom 3G ATTR{idVendor}=="230d", ATTR{idProduct}=="000b", RUN+="usb_modeswitch '/%k'" # Zoom 3G ATTR{idVendor}=="230d", ATTR{idProduct}=="000c", RUN+="usb_modeswitch '/%k'" # Intex Speed 3G v7.2 ATTR{idVendor}=="230d", ATTR{idProduct}=="000d", RUN+="usb_modeswitch '/%k'" # Linktop LW272/LW273 ATTR{idVendor}=="230d", ATTR{idProduct}=="0101", RUN+="usb_modeswitch '/%k'" # Teracom LW272 ATTR{idVendor}=="230d", ATTR{idProduct}=="0103", RUN+="usb_modeswitch '/%k'" # TP-Link MA180 ATTR{idVendor}=="2357", ATTR{idProduct}=="0200", RUN+="usb_modeswitch '/%k'" # TP-Link MA260 ATTR{idVendor}=="2357", ATTR{idProduct}=="f000", RUN+="usb_modeswitch '/%k'" # Titan 3.5G ATTR{idVendor}=="23a2", ATTR{idProduct}=="1010", RUN+="usb_modeswitch '/%k'" # Unknown devices ATTR{idVendor}=="257a", ATTR{idProduct}=="a000", RUN+="usb_modeswitch '/%k'" # Unknown devices ATTR{idVendor}=="257a", ATTR{idProduct}=="b000", RUN+="usb_modeswitch '/%k'" # Unknown devices ATTR{idVendor}=="257a", ATTR{idProduct}=="c000", RUN+="usb_modeswitch '/%k'" # Unknown devices ATTR{idVendor}=="257a", ATTR{idProduct}=="d000", RUN+="usb_modeswitch '/%k'" # BlueLink BL-EV08C ATTR{idVendor}=="6000", ATTR{idProduct}=="1000", RUN+="usb_modeswitch '/%k'" # Exiss Mobile E-190 series (made by C-motech) ATTR{idVendor}=="8888", ATTR{idProduct}=="6500", RUN+="usb_modeswitch '/%k'" # Aiko 81D, fw with wrong vendor ID ATTR{idVendor}=="ed09", ATTR{idProduct}=="1021", RUN+="usb_modeswitch '/%k'" LABEL="modeswitch_rules_end" PK��bx�\}��GH��GH��60-fprint-autosuspend.rulesnu��[��# UPEK TouchChip/Eikon Touch 300 SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="2015", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="2015", ENV{LIBFPRINT_DRIVER}="UPEK TouchChip/Eikon Touch 300" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="3001", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="3001", ENV{LIBFPRINT_DRIVER}="UPEK TouchChip/Eikon Touch 300" # UPEK TouchStrip Sensor-Only SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="2016", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="2016", ENV{LIBFPRINT_DRIVER}="UPEK TouchStrip Sensor-Only" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="1000", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="1000", ENV{LIBFPRINT_DRIVER}="UPEK TouchStrip Sensor-Only" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="1001", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="1001", ENV{LIBFPRINT_DRIVER}="UPEK TouchStrip Sensor-Only" # Veridicom 5thSense SUBSYSTEM=="usb", ATTRS{idVendor}=="061a", ATTRS{idProduct}=="0110", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="061a", ATTRS{idProduct}=="0110", ENV{LIBFPRINT_DRIVER}="Veridicom 5thSense" # Digital Persona U.are.U 4000/4000B/4500 SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00bc", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00bc", ENV{LIBFPRINT_DRIVER}="Digital Persona U.are.U 4000/4000B/4500" SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00bd", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00bd", ENV{LIBFPRINT_DRIVER}="Digital Persona U.are.U 4000/4000B/4500" SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00ca", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="045e", ATTRS{idProduct}=="00ca", ENV{LIBFPRINT_DRIVER}="Digital Persona U.are.U 4000/4000B/4500" SUBSYSTEM=="usb", ATTRS{idVendor}=="05ba", ATTRS{idProduct}=="0007", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="05ba", ATTRS{idProduct}=="0007", ENV{LIBFPRINT_DRIVER}="Digital Persona U.are.U 4000/4000B/4500" SUBSYSTEM=="usb", ATTRS{idVendor}=="05ba", ATTRS{idProduct}=="0008", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="05ba", ATTRS{idProduct}=="0008", ENV{LIBFPRINT_DRIVER}="Digital Persona U.are.U 4000/4000B/4500" SUBSYSTEM=="usb", ATTRS{idVendor}=="05ba", ATTRS{idProduct}=="000a", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="05ba", ATTRS{idProduct}=="000a", ENV{LIBFPRINT_DRIVER}="Digital Persona U.are.U 4000/4000B/4500" # AuthenTec AES1610 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1600", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1600", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1610" # AuthenTec AES1660 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1660", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1660", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1680", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1680", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1681", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1681", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1682", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1682", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1683", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1683", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1684", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1684", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1685", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1685", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1686", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1686", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1687", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1687", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1688", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1688", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1689", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="1689", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168a", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168a", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168b", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168b", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168c", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168c", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168d", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168d", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168e", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168e", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168f", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="168f", ENV{LIBFPRINT_DRIVER}="AuthenTec AES1660" # AuthenTec AES2501 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2500", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2500", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2501" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2580", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2580", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2501" # AuthenTec AES2550/AES2810 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2550", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2550", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2550/AES2810" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2810", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2810", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2550/AES2810" # AuthenTec AES2660 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2660", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2660", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2680", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2680", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2681", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2681", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2682", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2682", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2683", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2683", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2684", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2684", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2685", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2685", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2686", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2686", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2687", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2687", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2688", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2688", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2689", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2689", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268a", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268a", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268b", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268b", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268c", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268c", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268d", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268d", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268e", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268e", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268f", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="268f", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2691", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="2691", ENV{LIBFPRINT_DRIVER}="AuthenTec AES2660" # AuthenTec AES3500 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="5731", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="5731", ENV{LIBFPRINT_DRIVER}="AuthenTec AES3500" # AuthenTec AES4000 SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="5501", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="08ff", ATTRS{idProduct}=="5501", ENV{LIBFPRINT_DRIVER}="AuthenTec AES4000" # Validity VFS101 SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0001", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0001", ENV{LIBFPRINT_DRIVER}="Validity VFS101" # Validity VFS301 SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0005", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0005", ENV{LIBFPRINT_DRIVER}="Validity VFS301" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0008", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0008", ENV{LIBFPRINT_DRIVER}="Validity VFS301" # Validity VFS5011 SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0010", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0010", ENV{LIBFPRINT_DRIVER}="Validity VFS5011" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0011", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0011", ENV{LIBFPRINT_DRIVER}="Validity VFS5011" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0017", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0017", ENV{LIBFPRINT_DRIVER}="Validity VFS5011" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0018", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0018", ENV{LIBFPRINT_DRIVER}="Validity VFS5011" # Upek TouchChip Fingerprint Coprocessor SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="2020", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="147e", ATTRS{idProduct}=="2020", ENV{LIBFPRINT_DRIVER}="Upek TouchChip Fingerprint Coprocessor" # EgisTec ES603 SUBSYSTEM=="usb", ATTRS{idVendor}=="1c7a", ATTRS{idProduct}=="0603", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="1c7a", ATTRS{idProduct}=="0603", ENV{LIBFPRINT_DRIVER}="EgisTec ES603" # Validity VFS0050 SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0050", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0050", ENV{LIBFPRINT_DRIVER}="Validity VFS0050" # ElanTech Fingerprint Sensor SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0907", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0907", ENV{LIBFPRINT_DRIVER}="ElanTech Fingerprint Sensor" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0c26", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0c26", ENV{LIBFPRINT_DRIVER}="ElanTech Fingerprint Sensor" # Hardcoded whitelist SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0c03", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0c03", ENV{LIBFPRINT_DRIVER}="Hardcoded whitelist" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0c16", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f3", ATTRS{idProduct}=="0c16", ENV{LIBFPRINT_DRIVER}="Hardcoded whitelist" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0090", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0090", ENV{LIBFPRINT_DRIVER}="Hardcoded whitelist" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0091", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0091", ENV{LIBFPRINT_DRIVER}="Hardcoded whitelist" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0094", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0094", ENV{LIBFPRINT_DRIVER}="Hardcoded whitelist" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0097", ATTRS{dev}=="", TEST=="power/control", ATTR{power/control}="auto" SUBSYSTEM=="usb", ATTRS{idVendor}=="138a", ATTRS{idProduct}=="0097", ENV{LIBFPRINT_DRIVER}="Hardcoded whitelist" PK��bx�\��T��T��73-seat-late.rulesnu��[��# This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="seat_late_end" ENV{ID_SEAT}=="", ENV{ID_AUTOSEAT}=="1", ENV{ID_FOR_SEAT}!="", ENV{ID_SEAT}="seat-$env{ID_FOR_SEAT}" ENV{ID_SEAT}=="", IMPORT{parent}="ID_SEAT" ENV{ID_SEAT}!="", TAG+="$env{ID_SEAT}" TAG=="uaccess", ENV{MAJOR}!="", RUN{builtin}+="uaccess" LABEL="seat_late_end" PK��bx�\vV[~b��b��10-dm.rulesnu��6�$��# Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules create a DM control node in /dev/mapper directory. # The rules also create nodes named dm-x (x is a number) in /dev # directory and symlinks to these nodes with names given by # the actual DM names. Some udev environment variables are set # for use in later rules: # DM_NAME - actual DM device's name # DM_UUID - UUID set for DM device (blank if not specified) # DM_SUSPENDED - suspended state of DM device (0 or 1) # DM_UDEV_RULES_VSN - DM udev rules version # # These rules cover only basic device-mapper functionality in udev. # # Various DM subsystems may contain further subsystem-specific rules # in 11-dm-<subsystem_name>.rules which should be installed together # with the DM subsystem and which extend these basic rules. # For example: # 11-dm-lvm.rules for LVM subsystem # 11-dm-mpath.rules for multipath subsystem (since version 0.6.0, recommended!) # # Even more specific rules may be required by subsystems so always # check subsystem's upstream repository for recent set of rules. # Also, keep in mind that recent rules may also require recent # subsystem-specific binaries. KERNEL=="device-mapper", NAME="mapper/control" SUBSYSTEM!="block", GOTO="dm_end" KERNEL!="dm-[0-9]", GOTO="dm_end" # Device created, major and minor number assigned - "add" event generated. # Table loaded - no event generated. # Device resumed (or renamed) - "change" event generated. # Device removed - "remove" event generated. # # The dm-X nodes are always created, even on "add" event, we can't suppress # that (the node is created even earlier with devtmpfs). All the symlinks # (e.g. /dev/mapper) are created in right time after a device has its table # loaded and is properly resumed. For this reason, direct use of dm-X nodes # is not recommended. ACTION!="add\|change", GOTO="dm_end" # Decode udev control flags and set environment variables appropriately. # These flags are encoded in DM_COOKIE variable that was introduced in # kernel version 2.6.31. Therefore, we can use this feature with # kernels >= 2.6.31 only. Cookie is not decoded for remove event. ENV{DM_COOKIE}=="?", IMPORT{program}="/usr/sbin/dmsetup udevflags $env{DM_COOKIE}" # Rule out easy-to-detect inappropriate events first. ENV{DISK_RO}=="1", GOTO="dm_disable" # There is no cookie set nor any flags encoded in events not originating # in libdevmapper so we need to detect this and try to behave correctly. # For such spurious events, regenerate all flags from current udev database content # (this information would normally be inaccessible for spurious ADD and CHANGE events). ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}="1", GOTO="dm_flags_done" IMPORT{db}="DM_UDEV_DISABLE_DM_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_DISK_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_OTHER_RULES_FLAG" IMPORT{db}="DM_UDEV_LOW_PRIORITY_FLAG" IMPORT{db}="DM_UDEV_DISABLE_LIBRARY_FALLBACK_FLAG" IMPORT{db}="DM_UDEV_PRIMARY_SOURCE_FLAG" IMPORT{db}="DM_UDEV_FLAG7" IMPORT{db}="DM_UDEV_RULES_VSN" LABEL="dm_flags_done" # Normally, we operate on "change" events. But when coldplugging, there's an # "add" event present. We have to recognize this and do our actions in this # particular situation, too. Also, we don't want the nodes to be created # prematurely on "add" events while not coldplugging. We check # DM_UDEV_PRIMARY_SOURCE_FLAG to see if the device was activated correctly # before and if not, we ignore the "add" event totally. This way we can support # udev triggers generating "add" events (e.g. "udevadm trigger --action=add" or # "echo add > /sys/block/<dm_device>/uevent"). The trigger with "add" event is # also used at boot to reevaluate udev rules for all existing devices activated # before (e.g. in initrd). If udev is used in initrd, we require the udev init # script to not remove the existing udev database so we can reuse the information # stored at the time of device activation in the initrd. ACTION!="add", GOTO="dm_no_coldplug" ENV{DM_UDEV_RULES_VSN}!="1", ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}!="1", GOTO="dm_disable" ENV{DM_ACTIVATION}="1" LABEL="dm_no_coldplug" # Putting it together, following table is used to recognize genuine and spurious events. # N.B. Spurious events are generated based on use of the WATCH udev # rule or by triggering an event manually by "udevadm trigger" call # or by "echo <event_name> > /sys/block/dm-X/uevent". # # EVENT DM_UDEV_PRIMARY_SOURCE_FLAG DM_ACTIVATION # ====================================================================== # add event (genuine) 0 0 # change event (genuine) 1 1 # add event (spurious) # \|_ dev still not active 0 0 # \_ dev already active 1 1 # change event (spurious) # \|_ dev still not active 0 0 # \_ dev already active 1 0 # "dm" sysfs subdirectory is available in newer versions of DM # only (kernels >= 2.6.29). We have to check for its existence # and use dmsetup tool instead to get the DM name, uuid and # suspended state if the "dm" subdirectory is not present. # The "suspended" item was added even later (kernels >= 2.6.31), # so we also have to call dmsetup if the kernel version used # is in between these releases. TEST=="dm", ENV{DM_NAME}="$attr{dm/name}", ENV{DM_UUID}="$attr{dm/uuid}", ENV{DM_SUSPENDED}="$attr{dm/suspended}" TEST!="dm", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o name,uuid,suspended" ENV{DM_SUSPENDED}!="?", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o suspended" # dmsetup tool provides suspended state information in textual # form with values "Suspended"/"Active". We translate it to # 0/1 respectively to be consistent with sysfs values. ENV{DM_SUSPENDED}=="Active", ENV{DM_SUSPENDED}="0" ENV{DM_SUSPENDED}=="Suspended", ENV{DM_SUSPENDED}="1" # This variable provides a reliable way to check that device-mapper # rules were installed. It means that all needed variables are set # by these rules directly so there's no need to acquire them again # later. Other rules can alternate the functionality based on this # fact (e.g. fallback to rules that behave correctly even without # these rules installed). It also provides versioning for any # possible future changes. # VSN 1 - original rules # VSN 2 - add support for synthesized events ENV{DM_UDEV_RULES_VSN}="2" ENV{DM_UDEV_DISABLE_DM_RULES_FLAG}!="1", ENV{DM_NAME}=="?", SYMLINK+="mapper/$env{DM_NAME}" # Avoid processing and scanning a DM device in the other (foreign) # rules if it is in suspended state. However, we still keep 'disk' # and 'DM subsystem' related rules enabled in this case. ENV{DM_SUSPENDED}=="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" GOTO="dm_end" LABEL="dm_disable" ENV{DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" OPTIONS:="nowatch" LABEL="dm_end" PK��bx�\r��69-dm-lvm-metad.rulesnu��6�$��# Copyright (C) 2012 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for LVM. # # Scan all block devices having a PV label for LVM metadata. # Store this information in LVMetaD (the LVM metadata daemon) and maintain LVM # metadata state for improved performance by avoiding further scans while # running subsequent LVM commands or while using lvm2app library. # Also, notify LVMetaD about any relevant block device removal. # # This rule is essential for having the information in LVMetaD up-to-date. # It also requires blkid to be called on block devices before so only devices # used as LVM PVs are processed (ID_FS_TYPE="LVM2_member" or "LVM1_member"). SUBSYSTEM!="block", GOTO="lvm_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="lvm_end" # If the PV label got lost, inform lvmetad immediately. # Detect the lost PV label by comparing previous ID_FS_TYPE value with current one. ENV{.ID_FS_TYPE_NEW}="$env{ID_FS_TYPE}" IMPORT{db}="ID_FS_TYPE" ENV{ID_FS_TYPE}=="LVM2_member\|LVM1_member", ENV{.ID_FS_TYPE_NEW}!="LVM2_member\|LVM1_member", ENV{LVM_PV_GONE}="1" ENV{ID_FS_TYPE}="$env{.ID_FS_TYPE_NEW}" ENV{LVM_PV_GONE}=="1", GOTO="lvm_scan" # Only process devices already marked as a PV - this requires blkid to be called before. ENV{ID_FS_TYPE}!="LVM2_member\|LVM1_member", GOTO="lvm_end" ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="lvm_end" # Inform lvmetad about any PV that is gone. ACTION=="remove", GOTO="lvm_scan" # Create /dev/disk/by-id/lvm-pv-uuid-<PV_UUID> symlink for each PV ENV{ID_FS_UUID_ENC}=="?", SYMLINK+="disk/by-id/lvm-pv-uuid-$env{ID_FS_UUID_ENC}" # If the PV is a special device listed below, scan only if the device is # properly activated. These devices are not usable after an ADD event, # but they require an extra setup and they are ready after a CHANGE event. # Also support coldplugging with ADD event but only if the device is already # properly activated. # This logic should be eventually moved to rules where those particular # devices are processed primarily (MD and loop). # DM device: KERNEL!="dm-[0-9]", GOTO="next" ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}=="1", GOTO="lvm_scan" GOTO="lvm_end" # MD device: LABEL="next" KERNEL!="md[0-9]", GOTO="next" IMPORT{db}="LVM_MD_PV_ACTIVATED" ACTION=="add", ENV{LVM_MD_PV_ACTIVATED}=="1", GOTO="lvm_scan" ACTION=="change", ENV{LVM_MD_PV_ACTIVATED}!="1", TEST=="md/array_state", ENV{LVM_MD_PV_ACTIVATED}="1", GOTO="lvm_scan" ACTION=="add", KERNEL=="md[0-9]p[0-9]", GOTO="lvm_scan" ENV{LVM_MD_PV_ACTIVATED}!="1", ENV{SYSTEMD_READY}="0" GOTO="lvm_end" # Loop device: LABEL="next" KERNEL!="loop[0-9]", GOTO="next" ACTION=="add", ENV{LVM_LOOP_PV_ACTIVATED}=="1", GOTO="lvm_scan" ACTION=="change", ENV{LVM_LOOP_PV_ACTIVATED}!="1", TEST=="loop/backing_file", ENV{LVM_LOOP_PV_ACTIVATED}="1", GOTO="lvm_scan" ENV{LVM_LOOP_PV_ACTIVATED}!="1", ENV{SYSTEMD_READY}="0" GOTO="lvm_end" # If the PV is not a special device listed above, scan only if necessary. # For "direct_pvscan" mode (see below), this means run rules only an ADD events. # For "systemd_background" mode, systemd takes care of this by activating # the lvm2-pvscan@.service only once. LABEL="next" ACTION!="add\|change", GOTO="lvm_end" LABEL="lvm_scan" ENV{SYSTEMD_READY}="1" # The method for invoking pvscan is selected at build time with the option # --(enable\|disable)-udev-systemd-background-jobs to "configure". # On modern distributions with recent systemd, it's "systemd_background"; # on others, "direct_pvscan". GOTO="systemd_background" LABEL="systemd_background" # The table below summarises the situations in which we reach the LABEL="lvm_scan" # in the "systemd_background" case. # Marked by X, X means only if the special dev is properly set up. # The artificial ADD is supported for coldplugging. We avoid running the pvscan # on artificial CHANGE so there's no unexpected autoactivation when WATCH rule fires. # N.B. MD and loop never actually reaches lvm_scan on REMOVE as the PV label is gone # within a CHANGE event (these are caught by the "LVM_PV_GONE" rule at the beginning). # # In this case, we simply set up the dependency between the device and the pvscan # job using SYSTEMD_ALIAS (which sets up a simplified device identifier that # allows using "BindsTo" in the sytemd unit file) and SYSTEMD_WANTS (which tells # systemd to start the pvscan job once the device is ready). # We need to set these variables for both "add" and "change" events, otherwise # systemd may loose information about the device/unit dependencies. # # \| real ADD \| real CHANGE \| artificial ADD \| artificial CHANGE \| REMOVE # ============================================================================= # DM \| \| X \| X* \| \| X # MD \| \| X \| X* \| \| # loop \| \| X \| X* \| \| # other \| X \| X \| X \| \| X ACTION!="remove", ENV{LVM_PV_GONE}=="1", RUN+="/usr/bin/systemd-run /usr/sbin/lvm pvscan --cache $major:$minor", GOTO="lvm_end" ENV{SYSTEMD_ALIAS}="/dev/block/$major:$minor" ENV{SYSTEMD_WANTS}+="lvm2-pvscan@$major:$minor.service" GOTO="lvm_end" LABEL="direct_pvscan" # The table below summarises the situations in which we reach the LABEL="lvm_scan" # for the "direct_pvscan" case. # Marked by X, X* means only if the special dev is properly set up. # The artificial ADD is supported for coldplugging. We avoid running the pvscan # on artificial CHANGE so there's no unexpected autoactivation when WATCH rule fires. # # In this case, we need to make sure that pvscan is not invoked spuriously, therefore # we invoke it only for "add" events for "other" devices. # # \| real ADD \| real CHANGE \| artificial ADD \| artificial CHANGE \| REMOVE # ============================================================================= # DM \| \| X \| X* \| \| X # MD \| \| X \| X* \| \| # loop \| \| X \| X* \| \| # other \| X \| \| X \| \| X RUN+="/usr/sbin/lvm pvscan --background --cache --activate ay --major $major --minor $minor", ENV{LVM_SCANNED}="1" LABEL="lvm_end" PK��bx�\��Uj��j��80-drivers.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="drivers_end" ENV{MODALIAS}=="?", RUN{builtin}+="kmod load $env{MODALIAS}" SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN{builtin}+="kmod load tifm_sd" SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN{builtin}+="kmod load tifm_ms" SUBSYSTEM=="memstick", RUN{builtin}+="kmod load ms_block mspro_block" SUBSYSTEM=="i2o", RUN{builtin}+="kmod load i2o_block" SUBSYSTEM=="module", KERNEL=="parport_pc", RUN{builtin}+="kmod load ppdev" KERNEL=="mtdro", ENV{MTD_FTL}=="smartmedia", RUN{builtin}+="kmod load sm_ftl" LABEL="drivers_end" PK��bx�\!��80-net-name-slot.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION!="add", GOTO="net_name_slot_end" SUBSYSTEM!="net", GOTO="net_name_slot_end" NAME!="", GOTO="net_name_slot_end" IMPORT{cmdline}="net.ifnames" ENV{net.ifnames}=="0", GOTO="net_name_slot_end" NAME=="", ENV{ID_NET_NAME_ONBOARD}!="", NAME="$env{ID_NET_NAME_ONBOARD}" NAME=="", ENV{ID_NET_NAME_SLOT}!="", NAME="$env{ID_NET_NAME_SLOT}" NAME=="", ENV{ID_NET_NAME_PATH}!="", NAME="$env{ID_NET_NAME_PATH}" LABEL="net_name_slot_end" PK��bx�\Ѣ~��75-net-description.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="net_end" SUBSYSTEM!="net", GOTO="net_end" IMPORT{builtin}="net_id" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" SUBSYSTEMS=="usb", GOTO="net_end" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci" LABEL="net_end" PK��bx�\�+8-��98-kexec.rulesnu��[��SUBSYSTEM=="cpu", ACTION=="add", GOTO="kdump_reload" SUBSYSTEM=="cpu", ACTION=="remove", GOTO="kdump_reload" SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload" SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload" GOTO="kdump_reload_end" LABEL="kdump_reload" # If kdump is not loaded, calling "kdumpctl reload" will end up # doing nothing, but it and systemd-run will always generate # extra logs for each call, so trigger the "kdumpctl reload" # only if kdump service is active to avoid unnecessary logs RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service \|\| exit 0; /usr/bin/systemd-run --no-block /usr/lib/udev/kdump-udev-throttler'" LABEL="kdump_reload_end" PK��bx�\��~��70-mouse.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="mouse_end" KERNEL!="event", GOTO="mouse_end" ENV{ID_INPUT_MOUSE}=="", GOTO="mouse_end" # mouse:<subsystem>:v<vid>p<pid>:name:<name>: KERNELS=="input", ENV{ID_BUS}=="usb", \ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="mouse_end" KERNELS=="input", ENV{ID_BUS}=="bluetooth", \ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="mouse_end" DRIVERS=="psmouse", SUBSYSTEMS=="serio", \ IMPORT{builtin}="hwdb 'mouse:ps2::name:$attr{device/name}:'", \ GOTO="mouse_end" LABEL="mouse_end" PK��bx�\�oVI ��I ��63-md-raid-arrays.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="md_end" # handle md arrays ACTION!="add\|change", GOTO="md_end" KERNEL!="md", GOTO="md_end" ATTR{md/metadata_version}!="external:[A-Za-z]", ATTR{size}=="0", ENV{SYSTEMD_READY}="0", GOTO="md_end" # partitions have no md/{array_state,metadata_version}, but should not # for that reason be ignored. ENV{DEVTYPE}=="partition", GOTO="md_ignore_state" # container devices have a metadata version of e.g. 'external:ddf' and # never leave state 'inactive' ATTR{md/metadata_version}=="external:[A-Za-z]", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state" TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end" ATTR{md/array_state}=="clear\|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end" LABEL="md_ignore_state" IMPORT{program}="/usr/sbin/mdadm --detail --no-devices --export $devnode" ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace" ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}" ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?", SYMLINK+="md/$env{MD_DEVNAME}" ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace" ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n" ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n" ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n" IMPORT{builtin}="blkid" OPTIONS+="link_priority=100" OPTIONS+="watch" ENV{ID_FS_USAGE}=="filesystem\|other\|crypto", ENV{ID_FS_UUID_ENC}=="?", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem\|other", ENV{ID_PART_ENTRY_UUID}=="?", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_FS_USAGE}=="filesystem\|other", ENV{ID_FS_LABEL_ENC}=="?", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" ENV{MD_LEVEL}=="raid[1-9]", ENV{SYSTEMD_WANTS}+="mdmonitor.service" # Tell systemd to run mdmon for our container, if we need it. ENV{MD_LEVEL}=="raid[1-9]", ENV{MD_CONTAINER}=="?", PROGRAM="/usr/bin/readlink $env{MD_CONTAINER}", ENV{MD_MON_THIS}="%c" ENV{MD_MON_THIS}=="?", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@%c.service" LABEL="md_end" PK��bx�\��A��A��01-md-raid-creating.rulesnu��[��# do not edit this file, it will be overwritten on update # While mdadm is creating an array, it creates a file # /run/mdadm/creating-mdXXX. If that file exists, then # the array is not "ready" and we should make sure the # content is ignored. KERNEL=="md", TEST=="/run/mdadm/creating-$kernel", ENV{SYSTEMD_READY}="0" PK��bx�\��z�$��$��80-net-setup-link.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM!="net", GOTO="net_setup_link_end" IMPORT{builtin}="path_id" ACTION!="add", GOTO="net_setup_link_end" IMPORT{builtin}="net_setup_link" NAME=="", ENV{ID_NET_NAME}!="", NAME="$env{ID_NET_NAME}" LABEL="net_setup_link_end" PK��bx�\V&��40-redhat.rulesnu��[��# do not edit this file, it will be overwritten on update # CPU hotadd request SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1" # Memory hotadd request SUBSYSTEM!="memory", GOTO="memory_hotplug_end" ACTION!="add", GOTO="memory_hotplug_end" CONST{arch}=="s390", GOTO="memory_hotplug_end" ENV{.state}="online" CONST{virt}=="none", ENV{.state}="online_movable" ATTR{state}=="offline", ATTR{state}="$env{.state}" LABEL="memory_hotplug_end" # reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge" # load SCSI generic (sg) driver SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg" SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg" # Rule for prandom character device node permissions KERNEL=="prandom", MODE="0644" # Rules for creating the ID_PATH for SCSI devices based on the CCW bus # using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN> # ACTION=="remove", GOTO="zfcp_scsi_device_end" # # Set environment variable "ID_ZFCP_BUS" to "1" if the devices # (both disk and partition) are SCSI devices based on FCP devices # KERNEL=="sd", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1" # For SCSI disks KERNEL=="sd[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}" # For partitions on a SCSI disk KERNEL=="sd[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n" LABEL="zfcp_scsi_device_end" PK��bx�\D�8 ��8 �� 71-seat.rulesnu��[��# This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="seat_end" TAG=="uaccess", SUBSYSTEM!="sound", TAG+="seat" SUBSYSTEM=="sound", KERNEL=="card", TAG+="seat" SUBSYSTEM=="input", KERNEL=="input", TAG+="seat" SUBSYSTEM=="graphics", KERNEL=="fb[0-9]", TAG+="seat", TAG+="master-of-seat" SUBSYSTEM=="usb", ATTR{bDeviceClass}=="09", TAG+="seat" # 'Plugable' USB hub, sound, network, graphics adapter SUBSYSTEM=="usb", ATTR{idVendor}=="2230", ATTR{idProduct}=="000[13]", ENV{ID_AUTOSEAT}="1" # Mimo 720, with integrated USB hub, displaylink graphics, and e2i # touchscreen. This device carries no proper VID/PID in the USB hub, # but it does carry good ID data in the graphics component, hence we # check it from the parent. There's a bit of a race here however, # given that the child devices might not exist yet at the time this # rule is executed. To work around this we'll trigger the parent from # the child if we notice that the parent wasn't recognized yet. # Match parent SUBSYSTEM=="usb", ATTR{idVendor}=="058f", ATTR{idProduct}=="6254", \ ATTR{%k.2/idVendor}=="17e9", ATTR{%k.2/idProduct}=="401a", ATTR{%k.2/product}=="mimo inc", \ ENV{ID_AUTOSEAT}="1", ENV{ID_AVOID_LOOP}="1" # Match child, look for parent's ID_AVOID_LOOP SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \ ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \ IMPORT{parent}="ID_AVOID_LOOP" # Match child, retrigger parent SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \ ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \ ENV{ID_AVOID_LOOP}=="", \ RUN+="/usr/bin/udevadm trigger --parent-match=%p/.." TAG=="seat", ENV{ID_PATH}=="", IMPORT{builtin}="path_id" TAG=="seat", ENV{ID_FOR_SEAT}=="", ENV{ID_PATH_TAG}!="", ENV{ID_FOR_SEAT}="$env{SUBSYSTEM}-$env{ID_PATH_TAG}" SUBSYSTEM=="input", ATTR{name}=="Wiebetech LLC Wiebetech", RUN+="/usr/bin/loginctl lock-sessions" LABEL="seat_end" PK��bx�\�GP� �� 70-uaccess.rulesnu��[��# This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="uaccess_end" ENV{MAJOR}=="", GOTO="uaccess_end" # PTP/MTP protocol devices, cameras, portable media players SUBSYSTEM=="usb", ENV{ID_USB_INTERFACES}==":060101:", TAG+="uaccess" # Digicams with proprietary protocol ENV{ID_GPHOTO2}=="?", TAG+="uaccess" # SCSI and USB scanners ENV{libsane_matched}=="yes", TAG+="uaccess" # HPLIP devices (necessary for ink level check and HP tool maintenance) ENV{ID_HPLIP}=="1", TAG+="uaccess" # optical drives SUBSYSTEM=="block", ENV{ID_CDROM}=="1", TAG+="uaccess" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4\|5", TAG+="uaccess" # Sound devices SUBSYSTEM=="sound", TAG+="uaccess" \ OPTIONS+="static_node=snd/timer", OPTIONS+="static_node=snd/seq" # ffado is an userspace driver for firewire sound cards SUBSYSTEM=="firewire", ENV{ID_FFADO}=="1", TAG+="uaccess" # Webcams, frame grabber, TV cards SUBSYSTEM=="video4linux", TAG+="uaccess" SUBSYSTEM=="dvb", TAG+="uaccess" # IIDC devices: industrial cameras and some webcams SUBSYSTEM=="firewire", ATTR{units}=="0x00a02d:0x00010", TAG+="uaccess" SUBSYSTEM=="firewire", ATTR{units}=="0x00b09d:0x00010", TAG+="uaccess" # AV/C devices: camcorders, set-top boxes, TV sets, audio devices, and more SUBSYSTEM=="firewire", ATTR{units}=="0x00a02d:0x010001", TAG+="uaccess" SUBSYSTEM=="firewire", ATTR{units}=="0x00a02d:0x014001", TAG+="uaccess" # DRI video devices SUBSYSTEM=="drm", KERNEL=="card\|renderD", TAG+="uaccess" # KVM SUBSYSTEM=="misc", KERNEL=="kvm", TAG+="uaccess" # smart-card readers ENV{ID_SMARTCARD_READER}=="?", TAG+="uaccess" # (USB) authentication devices ENV{ID_SECURITY_TOKEN}=="?", TAG+="uaccess" # PDA devices ENV{ID_PDA}=="?", TAG+="uaccess" # Programmable remote control ENV{ID_REMOTE_CONTROL}=="1", TAG+="uaccess" # joysticks SUBSYSTEM=="input", ENV{ID_INPUT_JOYSTICK}=="?", TAG+="uaccess" # color measurement devices ENV{COLOR_MEASUREMENT_DEVICE}=="?", TAG+="uaccess" # DDC/CI device, usually high-end monitors such as the DreamColor ENV{DDC_DEVICE}=="?", TAG+="uaccess" # media player raw devices (for user-mode drivers, Android SDK, etc.) SUBSYSTEM=="usb", ENV{ID_MEDIA_PLAYER}=="?", TAG+="uaccess" # software-defined radio communication devices ENV{ID_SOFTWARE_RADIO}=="?", TAG+="uaccess" LABEL="uaccess_end" PK��bx�\�np��p��63-fc-wwpn-id.rulesnu��[��# # FC WWPN-based by-path links # ACTION!="add\|change", GOTO="fc_wwpn_end" KERNEL!="sd", GOTO="fc_wwpn_end" ENV{DEVTYPE}=="disk", IMPORT{program}="fc_wwpn_id %p" ENV{DEVTYPE}=="partition", IMPORT{parent}="FC_" ENV{FC_TARGET_WWPN}!="?", GOTO="fc_wwpn_end" ENV{FC_INITIATOR_WWPN}!="?", GOTO="fc_wwpn_end" ENV{FC_TARGET_LUN}!="?", GOTO="fc_wwpn_end" ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}" ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}-part%n" LABEL="fc_wwpn_end" PK��bx�\G��75-probe_mtd.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION!="add", GOTO="mtd_probe_end" KERNEL=="mtdro", IMPORT{program}="mtd_probe $devnode" LABEL="mtd_probe_end" PK��bx�\��i� �� 11-dm-lvm.rulesnu��6�$��# Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for LVM. # # These rules create symlinks for LVM logical volumes in # /dev/VG directory (VG is an actual VG name). Some udev # environment variables are set (they can be used in later # rules as well): # DM_LV_NAME - logical volume name # DM_VG_NAME - volume group name # DM_LV_LAYER - logical volume layer (blank if not set) # "add" event is processed on coldplug only! ACTION!="add\|change", GOTO="lvm_end" ENV{DM_UDEV_RULES_VSN}!="?", GOTO="lvm_end" ENV{DM_UUID}!="LVM-?", GOTO="lvm_end" # Use DM name and split it up into its VG/LV/layer constituents. IMPORT{program}="/usr/sbin/dmsetup splitname --nameprefixes --noheadings --rows $env{DM_NAME}" # DM_SUBSYSTEM_UDEV_FLAG0 is the 'NOSCAN' flag for LVM subsystem. # This flag is used to temporarily disable selected rules to prevent any # processing or scanning done on the LVM volume before LVM has any chance # to zero any stale metadata found within the LV data area. Such stale # metadata could cause false claim of the LV device, keeping it open etc. # # If the NOSCAN flag is present, backup selected existing flags used to # disable rules, then set them firmly so those selected rules are surely skipped. # Restore these flags once the NOSCAN flag is dropped (which is normally any # uevent that follows for this LV, even an artificially generated one). ENV{DM_SUBSYSTEM_UDEV_FLAG0}=="1", ENV{DM_NOSCAN}="1", ENV{DM_DISABLE_OTHER_RULES_FLAG_OLD}="$env{DM_UDEV_DISABLE_OTHER_RULES_FLAG}", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" ENV{DM_SUBSYSTEM_UDEV_FLAG0}!="1", IMPORT{db}="DM_NOSCAN", IMPORT{db}="DM_DISABLE_OTHER_RULES_FLAG_OLD" ENV{DM_SUBSYSTEM_UDEV_FLAG0}!="1", ENV{DM_NOSCAN}=="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="$env{DM_DISABLE_OTHER_RULES_FLAG_OLD}", \ ENV{DM_DISABLE_OTHER_RULES_FLAG_OLD}="", ENV{DM_NOSCAN}="" ENV{DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG}=="1", GOTO="lvm_end" OPTIONS+="event_timeout=180" # Do not create symlinks for inappropriate subdevices. ENV{DM_LV_NAME}=="pvmove?\|?_vorigin", GOTO="lvm_disable" ENV{DM_LV_LAYER}=="?", GOTO="lvm_disable" # Create symlinks for top-level devices only. ENV{DM_VG_NAME}=="?", ENV{DM_LV_NAME}=="?", SYMLINK+="$env{DM_VG_NAME}/$env{DM_LV_NAME}", GOTO="lvm_end" LABEL="lvm_disable" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" OPTIONS:="nowatch" LABEL="lvm_end" PK��bx�\�܆ۇ��&��40-redhat-disable-dell-ir-camera.rulesnu��[��# Disable known IR cameras in Dell Notebooks SUBSYSTEM=="usb", ATTRS{idVendor}=="0BDA", ATTRS{idProduct}=="58F6", ATTR{authorized}="0" PK��bx�\Ȗ��50-udev-default.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM=="virtio-ports", KERNEL=="vport", ATTR{name}=="?", SYMLINK+="virtio-ports/$attr{name}" # select "system RTC" or just use the first one SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc" SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id" ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}" ACTION!="add", GOTO="default_permissions_end" SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty[0-9]", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]", GROUP="tty", MODE="0620" SUBSYSTEM=="vc", KERNEL=="vcs\|vcsa", GROUP="tty" KERNEL=="tty[A-Z][0-9]\|pppox[0-9]\|ircomm[0-9]\|noz[0-9]\|rfcomm[0-9]", GROUP="dialout" SUBSYSTEM=="mem", KERNEL=="mem\|kmem\|port", GROUP="kmem", MODE="0640" SUBSYSTEM=="input", GROUP="input" SUBSYSTEM=="input", KERNEL=="js[0-9]", MODE="0664" SUBSYSTEM=="video4linux", GROUP="video" SUBSYSTEM=="misc", KERNEL=="agpgart", GROUP="video" SUBSYSTEM=="graphics", GROUP="video" SUBSYSTEM=="drm", GROUP="video" SUBSYSTEM=="dvb", GROUP="video" SUBSYSTEM=="kfd", GROUP="video" SUBSYSTEM=="sound", GROUP="audio", \ OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664" SUBSYSTEM=="firewire", ATTR{units}=="0x00a02d:0x00010", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="0x00b09d:0x00010", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="0x00a02d:0x010001", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="0x00a02d:0x014001", GROUP="video" KERNEL=="parport[0-9]", GROUP="lp" SUBSYSTEM=="printer", KERNEL=="lp", GROUP="lp" SUBSYSTEM=="ppdev", GROUP="lp" KERNEL=="lp[0-9]", GROUP="lp" KERNEL=="irlpt[0-9]", GROUP="lp" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}==":0701??:", GROUP="lp" SUBSYSTEM=="block", GROUP="disk" SUBSYSTEM=="block", KERNEL=="sr[0-9]", GROUP="cdrom" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4\|5", GROUP="cdrom" KERNEL=="sch[0-9]", GROUP="cdrom" KERNEL=="pktcdvd[0-9]", GROUP="cdrom" KERNEL=="pktcdvd", GROUP="cdrom" SUBSYSTEM=="scsi_generic\|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1\|8", GROUP="tape" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk" KERNEL=="qft[0-9]\|nqft[0-9]\|zqft[0-9]\|nzqft[0-9]\|rawqft[0-9]\|nrawqft[0-9]", GROUP="disk" KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control" KERNEL=="btrfs-control", GROUP="disk" KERNEL=="rawctl", GROUP="disk" SUBSYSTEM=="raw", KERNEL=="raw[0-9]", GROUP="disk" SUBSYSTEM=="aoe", GROUP="disk", MODE="0220" SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440" KERNEL=="rfkill", MODE="0664" KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun" KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse" LABEL="default_permissions_end" PK��bx�\M��60-evdev.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="evdev_end" KERNEL!="event", GOTO="evdev_end" # skip later rules when we find something for this input device IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=evdev:", \ RUN{builtin}+="keyboard", GOTO="evdev_end" # device matching the input device name and the machine's DMI data KERNELS=="input", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:$attr{[dmi/id]modalias}'", \ RUN{builtin}+="keyboard", GOTO="evdev_end" LABEL="evdev_end" PK��bx�$� ��75-tty-description.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="tty_end" SUBSYSTEM!="tty", GOTO="tty_end" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" SUBSYSTEMS=="usb", GOTO="tty_end" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci" LABEL="tty_end" PK��bx�\{��e��e��60-alias-kmsg.rulesnu��[��SUBSYSTEM!="block", GOTO="log_end" KERNEL=="loop\|ram", GOTO="log_end" ACTION=="remove", GOTO="log_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="log_end" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="log_end" IMPORT{cmdline}="udev.alias" ENV{udev.alias}=="1", RUN+="/bin/sh -c 'echo udev-alias: $name \($links$ > /dev/kmsg'" LABEL="log_end" PK��bx�\�I��95-dm-notify.rulesnu��6�$��# Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules are responsible for sending a notification to a process # waiting for completion of udev rules. The process is identified by # a cookie value sent within "change" and "remove" events (the cookie # value is set before by that process for every action requested). ENV{DM_COOKIE}=="?", RUN+="/usr/sbin/dmsetup udevcomplete $env{DM_COOKIE}" PK��bx�\�' ;��66-azure-ephemeral.rulesnu��[��# Azure specific rules ACTION!="add\|change", GOTO="cloud_init_end" SUBSYSTEM!="block", GOTO="cloud_init_end" ATTRS{ID_VENDOR}!="Msft", GOTO="cloud_init_end" ATTRS{ID_MODEL}!="Virtual_Disk", GOTO="cloud_init_end" # Root has a GUID of 0000 as the second value on Gen1 instances # The resource/resource has GUID of 0001 as the second value ATTRS{device_id}=="?00000000-0000-", ENV{fabric_name}="azure_root", GOTO="ci_azure_names" ATTRS{device_id}=="?00000000-0001-", ENV{fabric_name}="azure_resource", GOTO="ci_azure_names" # Azure well known SCSI controllers on Gen2 instances ATTRS{device_id}=="{f8b3781a-1e82-4818-a1c3-63d806ec15bb}", ENV{fabric_scsi_controller}="scsi0", GOTO="azure_datadisk" # Do not create symlinks for scsi[1-3] or unmatched device_ids ATTRS{device_id}=="{f8b3781b-1e82-4818-a1c3-63d806ec15bb}", ENV{fabric_scsi_controller}="scsi1", GOTO="cloud_init_end" ATTRS{device_id}=="{f8b3781c-1e82-4818-a1c3-63d806ec15bb}", ENV{fabric_scsi_controller}="scsi2", GOTO="cloud_init_end" ATTRS{device_id}=="{f8b3781d-1e82-4818-a1c3-63d806ec15bb}", ENV{fabric_scsi_controller}="scsi3", GOTO="cloud_init_end" GOTO="cloud_init_end" # Map scsi#/lun# fabric_name to azure_root\|resource on Gen2 instances LABEL="azure_datadisk" ENV{DEVTYPE}=="partition", PROGRAM="/bin/sh -c 'readlink /sys/class/block/%k/../device\|cut -d: -f4'", ENV{fabric_name}="$env{fabric_scsi_controller}/lun$result" ENV{DEVTYPE}=="disk", PROGRAM="/bin/sh -c 'readlink /sys/class/block/%k/device\|cut -d: -f4'", ENV{fabric_name}="$env{fabric_scsi_controller}/lun$result" ENV{fabric_name}=="scsi0/lun0", ENV{fabric_name}="azure_root", GOTO="ci_azure_names" ENV{fabric_name}=="scsi0/lun1", ENV{fabric_name}="azure_resource", GOTO="ci_azure_names" GOTO="cloud_init_end" # Create the symlinks LABEL="ci_azure_names" ENV{DEVTYPE}=="disk", SYMLINK+="disk/cloud/$env{fabric_name}" ENV{DEVTYPE}=="partition", SYMLINK+="disk/cloud/$env{fabric_name}-part%n" LABEL="cloud_init_end" PK��bx�\�\6�� 60-persistent-storage-tape.rulesnu��[��# do not edit this file, it will be overwritten on update # persistent storage links: /dev/tape/{by-id,by-path} ACTION=="remove", GOTO="persistent_storage_tape_end" # type 8 devices are "Medium Changers" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --whitelisted -d $devnode", \ SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{builtin}="path_id", \ SYMLINK+="tape/by-path/$env{ID_PATH}-changer" SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end" KERNEL=="st[0-9]\|nst[0-9]", ATTRS{ieee1394_id}=="?", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" KERNEL=="st[0-9]\|nst[0-9]", ENV{ID_SERIAL}!="?", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" KERNEL=="st[0-9]\|nst[0-9]", ENV{ID_SERIAL}!="?", SUBSYSTEMS=="scsi", KERNELS=="[0-9]:[0-9]", ENV{.BSG_DEV}="$root/bsg/$id" KERNEL=="st[0-9]\|nst[0-9]", ENV{ID_SERIAL}!="?", IMPORT{program}="scsi_id --whitelisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi" KERNEL=="st[0-9]", ENV{ID_SERIAL}=="?", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}" KERNEL=="nst[0-9]", ENV{ID_SERIAL}=="?", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst" # by-path (parent device path) KERNEL=="st[0-9]\|nst[0-9]", IMPORT{builtin}="path_id" KERNEL=="st[0-9]", ENV{ID_PATH}=="?", SYMLINK+="tape/by-path/$env{ID_PATH}" KERNEL=="nst[0-9]", ENV{ID_PATH}=="?", SYMLINK+="tape/by-path/$env{ID_PATH}-nst" LABEL="persistent_storage_tape_end" PK��bx�\�=[H8��8��91-drm-modeset.rulesnu��[��KERNEL=="controlD[0-9]", SUBSYSTEM=="drm", MODE="0600" PK��bx�\]Aȁ��60-net.rulesnu��[��ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?", ATTR{type}=="1", PROGRAM="/lib/udev/rename_device", RESULT=="?", NAME="$result" PK��bx�\��h��h��60-persistent-storage.rulesnu��[��# do not edit this file, it will be overwritten on update # persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path} # scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de> # forward scsi device event to corresponding block device ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block//uevent}="change" ACTION=="remove", GOTO="persistent_storage_end" # enable in-kernel media-presence polling ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", ATTR{parameters/events_dfl_poll_msecs}="2000" SUBSYSTEM!="block", GOTO="persistent_storage_end" # skip rules for inappropriate block devices KERNEL=="fd\|mtd\|nbd\|gnbd\|btibm\|dm-\|md\|zram\|mmcblk[0-9]rpmb", GOTO="persistent_storage_end" # ignore partitions that span the entire disk TEST=="whole_disk", GOTO="persistent_storage_end" # for partitions import parent information ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_" # NVMe KERNEL=="nvme[0-9]n[0-9]", ATTR{wwid}=="?", SYMLINK+="disk/by-id/nvme-$attr{wwid}" KERNEL=="nvme[0-9]n[0-9]p[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n" KERNEL=="nvme[0-9]n[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme[0-9]n[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?", ENV{ID_WWN}="$attr{wwid}" KERNEL=="nvme[0-9]n[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme[0-9]n[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?", ENV{ID_SERIAL_SHORT}=="?", ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}", OPTIONS="string_escape=replace" KERNEL=="nvme[0-9]n[0-9]p[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme[0-9]n[0-9]p[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme[0-9]n[0-9]p[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?", ENV{ID_SERIAL_SHORT}=="?", ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n", OPTIONS="string_escape=replace" # virtio-blk KERNEL=="vd[!0-9]", ATTRS{serial}=="?", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}" KERNEL=="vd[0-9]", ATTRS{serial}=="?", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n" # ATA devices using the "scsi" subsystem KERNEL=="sd[!0-9]\|sr", ENV{ID_SERIAL}!="?", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode" # ATA/ATAPI devices (SPC-3 or later) using the "scsi" subsystem KERNEL=="sd[!0-9]\|sr", ENV{ID_SERIAL}!="?", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]", IMPORT{program}="ata_id --export $devnode" # Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures) KERNEL=="sd[!0-9]\|sr", ENV{ID_SERIAL}!="?", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode" # Otherwise, fall back to using usb_id for USB devices KERNEL=="sd[!0-9]\|sr", ENV{ID_SERIAL}!="?", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" # scsi devices KERNEL=="sd[!0-9]\|sr", ENV{ID_SERIAL}!="?", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi" KERNEL=="cciss", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss" KERNEL=="sd\|sr\|cciss", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}" KERNEL=="sd\|cciss", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n" # firewire KERNEL=="sd[!0-9]\|sr", ATTRS{ieee1394_id}=="?", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" KERNEL=="sd[0-9]", ATTRS{ieee1394_id}=="?", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?", ATTRS{serial}=="?", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?", ENV{ID_SERIAL}=="?", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n" KERNEL=="mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?", ATTRS{serial}=="?", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?", ENV{ID_SERIAL}=="?", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # by-path (parent device path) ENV{DEVTYPE}=="disk", DEVPATH!="/virtual/", IMPORT{builtin}="path_id" ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?", SYMLINK+="disk/by-path/$env{ID_PATH}" ENV{DEVTYPE}=="disk", ENV{ID_SAS_PATH}=="?", SYMLINK+="disk/by-path/$env{ID_SAS_PATH}" ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n" ENV{DEVTYPE}=="partition", ENV{ID_SAS_PATH}=="?", SYMLINK+="disk/by-path/$env{ID_SAS_PATH}-part%n" # skip unpartitioned removable media devices from drivers which do not send "change" events ENV{DEVTYPE}=="disk", KERNEL!="sd\|sr", ATTR{removable}=="1", GOTO="persistent_storage_end" # legacy virtio-pci by-path links (deprecated) KERNEL=="vd[!0-9]", ENV{ID_PATH}=="pci-", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}" KERNEL=="vd[0-9]", ENV{ID_PATH}=="pci-", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n" # probe filesystem metadata of optical drives which have a media inserted KERNEL=="sr", ENV{DISK_EJECT_REQUEST}!="?", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?", \ IMPORT{builtin}="blkid --offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}" # single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET KERNEL=="sr", ENV{DISK_EJECT_REQUEST}!="?", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \ IMPORT{builtin}="blkid --noraid" # probe filesystem metadata of disks KERNEL!="sr", IMPORT{builtin}="blkid" # watch metadata changes by tools closing the device after writing KERNEL!="sr", OPTIONS+="watch" # by-label/by-uuid links (filesystem metadata) ENV{ID_FS_USAGE}=="filesystem\|other\|crypto", ENV{ID_FS_UUID_ENC}=="?", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem\|other", ENV{ID_FS_LABEL_ENC}=="?", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" # by-id (World Wide Name) ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}" ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n" # by-partlabel/by-partuuid links (partition metadata) ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_UUID}=="?", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" # add symlink to GPT root disk ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_GPT_AUTO_ROOT}=="1", SYMLINK+="gpt-auto-root" LABEL="persistent_storage_end" PK��bx�\YЫ��60-drm.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci\|usb\|platform", IMPORT{builtin}="path_id" PK��bx�\<Kr�\��\��81-kvm-rhel.rulesnu��[��DEVPATH=="/kvm", ACTION=="change", RUN+="/lib/udev/udev-kvm-check $env{COUNT} $env{EVENT}" PK��bx�\[��<��<��73-idrac.rulesnu��[��# do not edit this file, it will be overwritten on update # On Dell PowerEdge systems, the iDRAC7 and later support a USB Virtual NIC # with terminates in the iDRAC. Help identify this with 'idrac' ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="usb", ATTRS{idVendor}=="413c", ATTRS{idProduct}=="a102", NAME="idrac" PK��bx�\��/��60-cdrom_id.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="cdrom_end" SUBSYSTEM!="block", GOTO="cdrom_end" KERNEL!="sr[0-9]\|xvd", GOTO="cdrom_end" ENV{DEVTYPE}!="disk", GOTO="cdrom_end" # unconditionally tag device as CDROM KERNEL=="sr[0-9]", ENV{ID_CDROM}="1" # media eject button pressed ENV{DISK_EJECT_REQUEST}=="?", RUN+="cdrom_id --eject-media $devnode", GOTO="cdrom_end" # import device and media properties and lock tray to # enable the receiving of media eject button events IMPORT{program}="cdrom_id --lock-media $devnode" # ejecting a CD does not remove the device node, so mark the systemd device # unit as inactive while there is no medium; this automatically cleans up of # stale mounts after ejecting ENV{DISK_MEDIA_CHANGE}=="?", ENV{ID_CDROM_MEDIA}!="?", ENV{SYSTEMD_READY}="0" KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100" LABEL="cdrom_end" PK��bx�\�K��42-usb-hid-pm.rulesnu��[��# do not edit this file, it will be overwritten on update # # Enable autosuspend for qemu emulated usb hid devices # Note that there are buggy qemu versions (0.13 & older) which # advertise remote wakeup support but don't actually implement # it correctly. This is the reason why we need a match for the # serial number here. Old, broken versions have serial "1". # It has been changed to "42" after fixing the bug to indicate # remote wakeup is working. ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Mouse", ATTR{serial}!="1", TEST=="power/control", ATTR{power/control}="auto" ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Tablet", ATTR{serial}!="1", TEST=="power/control", ATTR{power/control}="auto" ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Keyboard", ATTR{serial}!="1", TEST=="power/control", ATTR{power/control}="auto" # Dell DRAC 4 ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="2500", TEST=="power/control", ATTR{power/control}="auto" # Dell DRAC 5 ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="0000", TEST=="power/control", ATTR{power/control}="auto" # IBM remote access ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="04b3", ATTR{idProduct}=="4001", TEST=="power/control", ATTR{power/control}="auto" ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="04b3", ATTR{idProduct}=="4002", TEST=="power/control", ATTR{power/control}="auto" ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="04b3", ATTR{idProduct}=="4012", TEST=="power/control", ATTR{power/control}="auto" # Raritan Computer, Inc KVM. ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}=="0002", TEST=="power/control", ATTR{power/control}="auto" # USB HID devices that are internal to the machine should also be safe to autosuspend ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="removable", GOTO="usb_hid_pm_end" ACTION=="add", SUBSYSTEM=="usb", SUBSYSTEMS=="usb", ATTRS{removable}=="unknown", GOTO="usb_hid_pm_end" ACTION=="add", SUBSYSTEM=="usb", ATTR{bInterfaceClass}=="03", ATTRS{removable}=="fixed", TEST=="../power/control", ATTR{../power/control}="auto" LABEL="usb_hid_pm_end" PK��bx�\G놎��95-udev-late.rulesnu��[��# do not edit this file, it will be overwritten on update # run a command on remove events ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}" PK��bx�\�(�Z��Z��$��69-md-clustered-confirm-device.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="clustermd_end" # handle md arrays KERNEL!="md", GOTO="clustermd_end" ENV{DEVTYPE}!="disk", GOTO="clustermd_end" ACTION!="change", GOTO="clustermd_end" ENV{EVENT}!="ADD_DEVICE", GOTO="clustermd_end" ENV{DEVICE_UUID}!="?", GOTO="clustermd_end" ENV{RAID_DISK}!="?", GOTO="clustermd_end" # Based on the received UUID, node confirms the device if # it is found by blkid, otherwise the node reports it is # missing. PROGRAM="/usr/sbin/blkid -o device -t UUID_SUB=$env{DEVICE_UUID}", ENV{.md.newdevice} = "$result" ENV{.md.newdevice}!="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:$env{.md.newdevice}" ENV{.md.newdevice}=="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:missing" LABEL="clustermd_end" PK��bx�\.��#��13-dm-disk.rulesnu��6�$��# Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules create symlinks in /dev/disk directory. # Symlinks that depend on probing filesystem type, # label and uuid are created only if the device is not # suspended. # "add" event is processed on coldplug only! ACTION!="add\|change", GOTO="dm_end" ENV{DM_UDEV_RULES_VSN}!="?", GOTO="dm_end" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="dm_end" SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}" ENV{DM_UUID}=="?", SYMLINK+="disk/by-id/dm-uuid-$env{DM_UUID}" ENV{DM_SUSPENDED}=="1", GOTO="dm_end" ENV{DM_NOSCAN}=="1", GOTO="dm_watch" IMPORT{builtin}="blkid" ENV{DM_UDEV_LOW_PRIORITY_FLAG}=="1", OPTIONS="link_priority=-100" ENV{ID_FS_USAGE}=="filesystem\|other\|crypto", ENV{ID_FS_UUID_ENC}=="?", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem\|other", ENV{ID_FS_LABEL_ENC}=="?", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" ENV{ID_PART_ENTRY_UUID}=="?", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_GPT_AUTO_ROOT}=="1", SYMLINK+="gpt-auto-root" # Add inotify watch to track changes on this device. # Using the watch rule is not optimal - it generates a lot of spurious # and useless events whenever the device opened for read-write is closed. # The best would be to generete the event directly in the tool changing # relevant information so only relevant events will be processed # (like creating a filesystem, changing filesystem label etc.). # # But let's use this until we have something better... LABEL="dm_watch" OPTIONS+="watch" LABEL="dm_end" PK��bx�\�綇��65-md-incremental.rulesnu��[��# This file causes block devices with Linux RAID (mdadm) signatures to # automatically cause mdadm to be run. # See udev(8) for syntax # Don't process any events if anaconda is running as anaconda brings up # raid devices manually ENV{ANACONDA}=="?", GOTO="md_end" # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="?", GOTO="md_end" # We process add events on block devices (since they are ready as soon as # they are added to the system), but we must process change events as well # on any dm devices (like LUKS partitions or LVM logical volumes) and on # md devices because both of these first get added, then get brought live # and trigger a change event. The reason we don't process change events # on bare hard disks is because if you stop all arrays on a disk, then # run fdisk on the disk to change the partitions, when fdisk exits it # triggers a change event, and we want to wait until all the fdisks on # all member disks are done before we do anything. Unfortunately, we have # no way of knowing that, so we just have to let those arrays be brought # up manually after fdisk has been run on all of the disks. # First, process all add events (md and dm devices will not really do # anything here, just regular disks, and this also won't get any imsm # array members either) SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="linux_raid_member", \ IMPORT{program}="/sbin/mdadm -I $env{DEVNAME} --export $devnode --offroot ${DEVLINKS}" SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="linux_raid_member", \ ENV{MD_STARTED}=="unsafe", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer" # Next, check to make sure the BIOS raid stuff wasn't turned off via cmdline IMPORT{cmdline}="noiswmd" IMPORT{cmdline}="nodmraid" ENV{noiswmd}=="?", GOTO="md_imsm_inc_end" ENV{nodmraid}=="?", GOTO="md_imsm_inc_end" SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="isw_raid_member", \ RUN+="/sbin/mdadm -I $env{DEVNAME}" LABEL="md_imsm_inc_end" SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}=="?", \ RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}" SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}!="?", \ RUN+="/sbin/mdadm -If $name" # Next make sure that this isn't a dm device we should skip for some reason ENV{DM_UDEV_RULES_VSN}!="?", GOTO="dm_change_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_change_end" ENV{DM_SUSPENDED}=="1", GOTO="dm_change_end" KERNEL=="dm-", SUBSYSTEM=="block", ENV{ID_FS_TYPE}=="linux_raid_member", \ ACTION=="change", RUN+="/sbin/mdadm -I $env{DEVNAME}" LABEL="dm_change_end" # Finally catch any nested md raid arrays. If we brought up an md raid # array that's part of another md raid array, it won't be ready to be used # until the change event that occurs when it becomes live KERNEL=="md", SUBSYSTEM=="block", ENV{ID_FS_TYPE}=="linux_raid_member", \ ACTION=="change", RUN+="/sbin/mdadm -I $env{DEVNAME}" LABEL="md_end" PK��bx�\W��h��h��60-persistent-alsa.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_alsa_end" SUBSYSTEM!="sound", GOTO="persistent_alsa_end" KERNEL!="controlC[0-9]", GOTO="persistent_alsa_end" SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id" ENV{ID_SERIAL}=="?", ENV{ID_USB_INTERFACE_NUM}=="?", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}" ENV{ID_SERIAL}=="?", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?", SYMLINK+="snd/by-path/$env{ID_PATH}" LABEL="persistent_alsa_end" PK��bx�\�� 60-persistent-input.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_input_end" SUBSYSTEM!="input", GOTO="persistent_input_end" SUBSYSTEMS=="bluetooth", GOTO="persistent_input_end" SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id" # determine class name for persistent symlinks ENV{ID_INPUT_KEYBOARD}=="?", ENV{.INPUT_CLASS}="kbd" ENV{ID_INPUT_MOUSE}=="?", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_TOUCHPAD}=="?", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_TABLET}=="?", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_JOYSTICK}=="?", ENV{.INPUT_CLASS}="joystick" DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr" ATTRS{name}=="dvb\|DVB\| IR ", ENV{.INPUT_CLASS}="ir" # fill empty serial number ENV{.INPUT_CLASS}=="?", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial" # by-id links KERNEL=="mouse\|js", ENV{ID_BUS}=="?", ENV{.INPUT_CLASS}=="?", ATTRS{bInterfaceNumber}=="\|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}" KERNEL=="mouse\|js", ENV{ID_BUS}=="?", ENV{.INPUT_CLASS}=="?", ATTRS{bInterfaceNumber}=="?", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}" KERNEL=="event", ENV{ID_BUS}=="?", ENV{.INPUT_CLASS}=="?", ATTRS{bInterfaceNumber}=="\|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}" KERNEL=="event", ENV{ID_BUS}=="?", ENV{.INPUT_CLASS}=="?", ATTRS{bInterfaceNumber}=="?", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}" # allow empty class for USB devices, by appending the interface number SUBSYSTEMS=="usb", ENV{ID_BUS}=="?", KERNEL=="event", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?", \ SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}" # by-path SUBSYSTEMS=="pci\|usb\|platform\|acpi", IMPORT{builtin}="path_id" ENV{ID_PATH}=="?", KERNEL=="mouse\|js", ENV{.INPUT_CLASS}=="?", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}" ENV{ID_PATH}=="?", KERNEL=="event", ENV{.INPUT_CLASS}=="?", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}" # allow empty class for platform and usb devices; platform supports only a single interface that way SUBSYSTEMS=="usb\|platform", ENV{ID_PATH}=="?", KERNEL=="event", ENV{.INPUT_CLASS}=="", \ SYMLINK+="input/by-path/$env{ID_PATH}-event" LABEL="persistent_input_end" PK��bx�\:��#��#��85-regulatory.rulesnu��[��# Runs CRDA for kernel wireless regulatory events. # For more information see: # http://wireless.kernel.org/en/developers/Regulatory/CRDA SUBSYSTEM=="ieee80211", ACTION=="add", RUN+="/sbin/setregdomain" KERNEL=="regulatory", ACTION=="change", SUBSYSTEM=="platform", RUN+="/usr/sbin/crda" PK��bx�\��.��99-systemd.rulesnu��[��# This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="systemd_end" SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]\|hvc\|xvc\|hvsi\|ttysclp\|sclp_line\|3270/tty[0-9]", TAG+="systemd" KERNEL=="vport", TAG+="systemd" SUBSYSTEM=="block", KERNEL!="ram", TAG+="systemd" SUBSYSTEM=="block", KERNEL!="ram", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0" # Ignore encrypted devices with no identified superblock on it, since # we are probably still calling mke2fs or mkswap on it. SUBSYSTEM=="block", KERNEL!="ram", ENV{DM_UUID}=="CRYPT-", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0" # Ignore raid devices that are not yet assembled and started SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md", TEST!="md/array_state", ENV{SYSTEMD_READY}="0" SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md", ATTR{md/array_state}=="\|clear\|inactive", ENV{SYSTEMD_READY}="0" # Ignore loop devices that don't have any file attached SUBSYSTEM=="block", KERNEL=="loop[0-9]", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0" # Ignore nbd devices in the "add" event, with "change" the nbd is ready ACTION=="add", SUBSYSTEM=="block", KERNEL=="nbd", ENV{SYSTEMD_READY}="0" # We need a hardware independent way to identify network devices. We # use the /sys/subsystem path for this. Current vanilla kernels don't # actually support that hierarchy right now, however upcoming kernels # will. HAL and udev internally support /sys/subsystem already, hence # it should be safe to use this here, too. This is mostly just an # identification string for systemd, so whether the path actually is # accessible or not does not matter as long as it is unique and in the # filesystem namespace. # # http://cgit.freedesktop.org/systemd/systemd/tree/src/libudev/libudev-enumerate.c#n922 SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name" SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k" SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}+="bluetooth.target" ENV{ID_SMARTCARD_READER}=="?", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target" SUBSYSTEM=="sound", KERNEL=="card", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target" SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target" SUBSYSTEM=="usb", KERNEL=="lp", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}==":0701??:", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target" # Apply sysctl variables to network devices (and only to those) as they appear. ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name" # Pull in backlight save/restore for all backlight devices and # keyboard backlights SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service" SUBSYSTEM=="leds", KERNEL=="kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service" # Pull in rfkill save/restore for all rfkill devices SUBSYSTEM=="rfkill", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/rfkill/devices/%k", ENV{SYSTEMD_WANTS}+="systemd-rfkill@$name.service" # Asynchronously mount file systems implemented by these modules as # soon as they are loaded. SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount" SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount" LABEL="systemd_end" PK��bx�\�O��76-phys-port-name.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION!="add", GOTO="phys_port_name_end" SUBSYSTEM!="net", GOTO="phys_port_name_end" DRIVERS=="mlxsw", ATTR{phys_port_name}=="?", IMPORT{program}="/usr/lib/udev/phys-port-name-gen %k" DRIVERS=="rocker", ATTR{phys_port_name}=="?", IMPORT{program}="/usr/lib/udev/phys-port-name-gen %k" DRIVERS=="nfp", ATTR{phys_port_name}=="?", IMPORT{program}="/usr/lib/udev/phys-port-name-gen %k" LABEL="phys_port_name_end" PK��bx�\�}w��70-power-switch.rulesnu��[��# This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="power_switch_end" SUBSYSTEM=="input", KERNEL=="event", SUBSYSTEMS=="acpi", TAG+="power-switch" SUBSYSTEM=="input", KERNEL=="event", KERNELS=="thinkpad_acpi", TAG+="power-switch" SUBSYSTEM=="input", KERNEL=="event", ATTRS{name}=="twl4030_pwrbutton", TAG+="power-switch" SUBSYSTEM=="input", KERNEL=="event", ATTRS{name}=="tps65217_pwr_but", TAG+="power-switch" LABEL="power_switch_end" PK��bx�\!T�V��(��40-redhat-disable-lenovo-ir-camera.rulesnu��[��# Disable known IR cameras in Lenovo Notebooks SUBSYSTEM=="usb", ATTRS{idVendor}=="5986", ATTRS{idProduct}=="211a", ATTR{authorized}="0" SUBSYSTEM=="usb", ATTRS{idVendor}=="5986", ATTRS{idProduct}=="1141", ATTR{authorized}="0" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f2", ATTRS{idProduct}=="b605", ATTR{authorized}="0" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f2", ATTRS{idProduct}=="b613", ATTR{authorized}="0" SUBSYSTEM=="usb", ATTRS{idVendor}=="04f2", ATTRS{idProduct}=="b615", ATTR{authorized}="0"PK��bx�\�<�0��0��78-sound-card.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM!="sound", GOTO="sound_end" ACTION=="add\|change", KERNEL=="controlC", ATTR{../uevent}="change" ACTION!="change", GOTO="sound_end" # Ok, we probably need a little explanation here for what the two lines above # are good for. # # The story goes like this: when ALSA registers a new sound card it emits a # series of 'add' events to userspace, for the main card device and for all the # child device nodes that belong to it. udev relays those to applications, # however only maintains the order between father and child, but not between # the siblings. The control device node creation can be used as synchronization # point. All other devices that belong to a card are created in the kernel # before it. However unfortunately due to the fact that siblings are forwarded # out of order by udev this fact is lost to applications. # # OTOH before an application can open a device it needs to make sure that all # its device nodes are completely created and set up. # # As a workaround for this issue we have added the udev rule above which will # generate a 'change' event on the main card device from the 'add' event of the # card's control device. Due to the ordering semantics of udev this event will # only be relayed after all child devices have finished processing properly. # When an application needs to listen for appearing devices it can hence look # for 'change' events only, and ignore the actual 'add' events. # # When the application is initialized at the same time as a device is plugged # in it may need to figure out if the 'change' event has already been triggered # or not for a card. To find that out we store the flag environment variable # SOUND_INITIALIZED on the device which simply tells us if the card 'change' # event has already been processed. KERNEL!="card", GOTO="sound_end" ENV{SOUND_INITIALIZED}="1" IMPORT{builtin}="hwdb" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" SUBSYSTEMS=="usb", GOTO="skip_pci" SUBSYSTEMS=="firewire", ATTRS{vendor_name}=="?", ATTRS{model_name}=="?", \ ENV{ID_BUS}="firewire", ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}" SUBSYSTEMS=="firewire", ATTRS{guid}=="?", ENV{ID_ID}="firewire-$attr{guid}" SUBSYSTEMS=="firewire", GOTO="skip_pci" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" LABEL="skip_pci" ENV{ID_SERIAL}=="?", ENV{ID_USB_INTERFACE_NUM}=="?", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}-$attr{id}" ENV{ID_SERIAL}=="?", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$attr{id}" IMPORT{builtin}="path_id" # The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept # in sync with those defined for PulseAudio's src/pulse/proplist.h # PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties. # If the first PCM device of this card has the pcm class 'modem', then the card is a modem ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end" # Identify cards on the internal PCI bus as internal SUBSYSTEMS=="pci", DEVPATH=="/0000:00:??.?/sound/", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end" # Devices that also support Image/Video interfaces are most likely webcams SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}==":0e????:", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end" # Matching on the model strings is a bit ugly, I admit ENV{ID_MODEL}=="[Ss]peaker", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="[Ss]peaker", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end" ENV{ID_MODEL}=="[Hh]eadphone", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="[Hh]eadphone", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end" ENV{ID_MODEL}=="[Hh]eadset", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="[Hh]eadset", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end" ENV{ID_MODEL}=="[Hh]andset", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="[Hh]andset", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end" ENV{ID_MODEL}=="[Mm]icrophone", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="[Mm]icrophone", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end" LABEL="sound_end" PK��bx�\֊�.��64-btrfs.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="btrfs_end" ACTION=="remove", GOTO="btrfs_end" ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end" # let the kernel know about this btrfs filesystem, and check if it is complete IMPORT{builtin}="btrfs ready $devnode" # mark the device as not ready to be used by the system ENV{ID_BTRFS_READY}=="0", ENV{SYSTEMD_READY}="0" LABEL="btrfs_end" PK��bx�\��60-persistent-v4l.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_v4l_end" SUBSYSTEM!="video4linux", GOTO="persistent_v4l_end" ENV{MAJOR}=="", GOTO="persistent_v4l_end" IMPORT{program}="v4l_id $devnode" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" KERNEL=="video", ENV{ID_SERIAL}=="?", SYMLINK+="v4l/by-id/$env{ID_BUS}-$env{ID_SERIAL}-video-index$attr{index}" # check for valid "index" number TEST!="index", GOTO="persistent_v4l_end" ATTR{index}!="?", GOTO="persistent_v4l_end" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?", KERNEL=="video\|vbi", SYMLINK+="v4l/by-path/$env{ID_PATH}-video-index$attr{index}" ENV{ID_PATH}=="?", KERNEL=="audio", SYMLINK+="v4l/by-path/$env{ID_PATH}-audio-index$attr{index}" LABEL="persistent_v4l_end" PK��bx�\fֶ��61-accelerometer.rulesnu��[��# do not edit this file, it will be overwritten on update SUBSYSTEM=="input", ACTION!="remove", ENV{ID_INPUT_ACCELEROMETER}=="1", IMPORT{program}="accelerometer %p" PK��bx�\}G��60-persistent-serial.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_serial_end" SUBSYSTEM!="tty", GOTO="persistent_serial_end" KERNEL!="ttyUSB[0-9]\|ttyACM[0-9]", GOTO="persistent_serial_end" SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}" ENV{ID_PATH}=="?", ENV{.ID_PORT}=="?", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}" IMPORT{builtin}="usb_id" ENV{ID_SERIAL}=="", GOTO="persistent_serial_end" SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}" ENV{ID_USB_INTERFACE_NUM}=="", GOTO="persistent_serial_end" ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}" ENV{.ID_PORT}=="?", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}" LABEL="persistent_serial_end" PK��bx�\�� ��99-qemu-guest-agent.rulesnu��[��SUBSYSTEM=="virtio-ports", ATTR{name}=="org.qemu.guest_agent.0", \ TAG+="systemd" ENV{SYSTEMD_WANTS}="qemu-guest-agent.service" PK��bx�\�p�F��F��60-raw.rulesnu��[��# # Enter raw device bindings here. # # An example would be: # ACTION=="add", KERNEL=="sda", RUN+="/usr/bin/raw /dev/raw/raw1 %N" # to bind /dev/raw/raw1 to /dev/sda, or # ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="1", RUN+="/usr/bin/raw /dev/raw/raw2 %M %m" # to bind /dev/raw/raw2 to the device with major 8, minor 1. PK��bx�\q��5��5��60-keyboard.rulesnu��[��# do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="keyboard_end" KERNEL!="event", GOTO="keyboard_end" ENV{ID_INPUT_KEY}=="", GOTO="keyboard_end" # ignore all bluetooth devices SUBSYSTEMS=="bluetooth", GOTO="keyboard_end" # import key mapping for USB device SUBSYSTEMS=="usb", IMPORT{builtin}="hwdb --subsystem=usb --lookup-prefix=keyboard:", \ RUN{builtin}+="keyboard", GOTO="keyboard_end" # import key mapping for AT keyboard from DMI data DRIVERS=="atkbd", IMPORT{builtin}="hwdb 'keyboard:$attr{[dmi/id]modalias}'", \ RUN{builtin}+="keyboard", GOTO="keyboard_end" # import key mapping for platform input device KERNELS=="input", IMPORT{builtin}="hwdb 'keyboard:name:$attr{name}:$attr{[dmi/id]modalias}'", \ RUN{builtin}+="keyboard", GOTO="keyboard_end" LABEL="keyboard_end" PK��J�\��!��75-persistent-net-generator.rulesnu��[��PK��J�\��1�v��v��S��69-vdo-start-by-dev.rulesnu��[��PK��bx�\�$��50-rbd.rulesnu��[��PK��bx�\�F�rY��Y��0��70-touchpad.rulesnu��[��PK��bx�\�`~=��90-vconsole.rulesnu��[��PK��bx�\�-Ţ��40-usb_modeswitch.rulesnu��[��PK��bx�\}��GH��GH��)��60-fprint-autosuspend.rulesnu��[��PK��bx�\��T��T��73-seat-late.rulesnu��[��PK��bx�\vV[~b��b��Q��10-dm.rulesnu��6�$��PK��bx�\r��69-dm-lvm-metad.rulesnu��6�$��PK��bx�\��Uj��j��%�80-drivers.rulesnu��[��PK��bx�\!��'�80-net-name-slot.rulesnu��[��PK��bx�\Ѣ~��)�75-net-description.rulesnu��[��PK��bx�\�+8-��,�98-kexec.rulesnu��[��PK��bx�\��~��.�70-mouse.rulesnu��[��PK��bx�\�oVI ��I ��2�63-md-raid-arrays.rulesnu��[��PK��bx�\��A��A��;�01-md-raid-creating.rulesnu��[��PK��bx�\��z�$��$��&=�80-net-setup-link.rulesnu��[��PK��bx�\V&��>�40-redhat.rulesnu��[��PK��bx�\D�8 ��8 �� E�71-seat.rulesnu��[��PK��bx�\�GP� �� ?O�70-uaccess.rulesnu��[��PK��bx�\�np��p��Y�63-fc-wwpn-id.rulesnu��[��PK��bx�\G��Q\�75-probe_mtd.rulesnu��[��PK��bx�\��i� �� A]�11-dm-lvm.rulesnu��6�$��PK��bx�\�܆ۇ��&��g�40-redhat-disable-dell-ir-camera.rulesnu��[��PK��bx�\Ȗ��g�50-udev-default.rulesnu��[��PK��bx�\M��u�60-evdev.rulesnu��[��PK��bx�\(� ��^w�75-tty-description.rulesnu��[��PK��bx�\{��e��e��Py�60-alias-kmsg.rulesnu��[��PK��bx�\�I��z�95-dm-notify.rulesnu��6�$��PK��bx�\�' ;��}�66-azure-ephemeral.rulesnu��[��PK��bx�\�\6�� 60-persistent-storage-tape.rulesnu��[��PK��bx�\�=[H8��8��o��91-drm-modeset.rulesnu��[��PK��bx�\]Aȁ��60-net.rulesnu��[��PK��bx�\��h��h��60-persistent-storage.rulesnu��[��PK��bx�\YЫ��[��60-drm.rulesnu��[��PK��bx�\<Kr�\��\��0��81-kvm-rhel.rulesnu��[��PK��bx�\[��<��<��ͪ�73-idrac.rulesnu��[��PK��bx�\��/��G��60-cdrom_id.rulesnu��[��PK��bx�\�K��42-usb-hid-pm.rulesnu��[��PK��bx�\G놎��95-udev-late.rulesnu��[��PK��bx�\�(�Z��Z��$��չ�69-md-clustered-confirm-device.rulesnu��[��PK��bx�\.��#��13-dm-disk.rulesnu��6�$��PK��bx�\�綇��65-md-incremental.rulesnu��[��PK��bx�\W��h��h��60-persistent-alsa.rulesnu��[��PK��bx�\�� l��60-persistent-input.rulesnu��[��PK��bx�\:��#��#��U��85-regulatory.rulesnu��[��PK��bx�\��.��99-systemd.rulesnu��[��PK��bx�\�O��76-phys-port-name.rulesnu��[��PK��bx�\�}w��70-power-switch.rulesnu��[��PK��bx�\!T�V��(�� 40-redhat-disable-lenovo-ir-camera.rulesnu��[��PK��bx�\�<�0��0��R��78-sound-card.rulesnu��[��PK��bx�\֊�.��64-btrfs.rulesnu��[��PK��bx�\�� 60-persistent-v4l.rulesnu��[��PK��bx�\fֶ��61-accelerometer.rulesnu��[��PK��bx�\}G�� 60-persistent-serial.rulesnu��[��PK��bx�\�� *��99-qemu-guest-agent.rulesnu��[��PK��bx�\�p�F��F��60-raw.rulesnu��[��PK��bx�\q��5��5��#�60-keyboard.rulesnu��[��PK��;�;�x��

| ver. 1.4 | Github | . | PHP 8.2.32 | Generation time: 0.07 | proxy | phpinfo | Settings